We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare DDR5 RDIMM module 96GB 6400MHz CL52 1.1V 288-pin ECC registered server memory

NEMIX RAM

NEMIX RAM 96GB DDR5 6400MHz CL52 1.1V 2Rx4 ECC Registered RDIMM Supermicro H13SVW-N memory upgrade

SKU CH-MM5H-QHK3H

96GB DDR5 6400MHz CL52 1.1V 2Rx4 ECC Registered RDIMM validated for Supermicro H13SVW-N motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96GB DDR5-6400 capacity ready for heavy server workloads
  • Registered ECC RDIMM design prevents data corruption in production
  • CL52 latency at 1.1V matches Supermicro H13SVW-N timing exactly
  • 2Rx4 288-pin form factor fits the board's memory slots precisely
  • Lifetime replacement warranty with US-based technical support included

Exact-match server upgrade

This 96 GB DDR5 registered ECC RDIMM is built for the Supermicro H13SVW-N motherboard. It delivers the precise rank, voltage and timing the board's memory controller expects so every slot can be populated at full capacity.

DDR5 RDIMM platform limits

Registered DDR5 modules offload the memory controller to keep all channels stable when fully populated, but they require a motherboard wired for RDIMM signalling and cannot be mixed with unbuffered UDIMMs or SODIMMs. ECC corrects single-bit errors on the fly, yet the system BIOS must enable and support the feature for it to function.

2Rx4 rank and 1.10 V voltage

The dual-rank 2Rx4 organisation and 1.10 V operating voltage are the decisive parameters; if your server's memory population rules call for a different rank count or voltage this module will not post at its rated 6400 MT/s speed.

Highlights

  • 96GB DDR5-6400 capacity ready for heavy server workloads
  • Registered ECC RDIMM design prevents data corruption in production
  • CL52 latency at 1.1V matches Supermicro H13SVW-N timing exactly
  • 2Rx4 288-pin form factor fits the board's memory slots precisely
  • Lifetime replacement warranty with US-based technical support included

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Should I choose the 96GB DDR5-6400 CL52 2Rx4 kit or a lower-capacity module for my Supermicro H13SVW-N?

The 96GB kit matches the board's qualified 2Rx4 registered ECC spec at 1.1V, so every slot can be populated at the rated 6400 MT/s without down-clocking. Smaller modules would work but leave total capacity below what the platform can address.

What does the 6400 MT/s rating deliver once the DIMMs are installed in the server?

The memory controller will run the kit at DDR5-6400 (PC5-51200) with CL52 latency at the standard 1.1V, providing the full bandwidth the H13SVW-N memory subsystem is validated for.

How does the 288-pin RDIMM interface and registered ECC design affect real-world operation?

The registered buffer reduces electrical load on the controller, allowing full-speed operation with all slots filled, while on-die ECC corrects single-bit errors automatically to prevent silent data corruption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.