We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, narrow SODIMM form factor, no heat spreader, gold edge connector visible

NEMIX RAM

NEMIX RAM CSE-E102TF2 16GB DDR5 4800 CL40 1.1V 262-Pin SODIMM memory upgrade

SKU CH-EMPN-2DPNM MPN CSE-E102TF2

16 GB DDR5 SODIMM running at 4800 MHz CL40 1.1 V for SuperMicro SYS-E102-13R-H

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Designed for SuperMicro SYS-E102-13R-H server compatibility
  • DDR5 4800 speed boosts data throughput
  • 16 GB single module expands memory capacity
  • 1 V operation lowers power consumption
  • CL40 latency supports responsive system performance

SuperMicro SYS-E102 DDR5 SODIMM

This 16GB DDR5-4800 module is built for the SuperMicro IoT SuperServer SYS-E102-13R-H. It runs at PC5-38400 with CL40 latency at 1.10V. The 262-pin SODIMM fits the server's memory slots directly.

IT Teams Maintaining SYS-E102-13R-H

Administrators expanding memory in this specific SuperServer platform will find the part validated for compatibility. Systems requiring ECC protection or registered DIMMs cannot use this unbuffered non-ECC module.

CL40 CAS Latency at DDR5-4800

The CL40 timing defines the module's response speed within the PC5-38400 standard. Matching this latency is essential when adding to existing memory in the SYS-E102-13R-H.

Highlights

  • Designed for SuperMicro SYS-E102-13R-H server compatibility
  • DDR5 4800 speed boosts data throughput
  • 16 GB single module expands memory capacity
  • 1 V operation lowers power consumption
  • CL40 latency supports responsive system performance

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the 16 GB DDR5 4800 module need a heat spreader to stay within safe temperatures in the SuperMicro SYS-E102-13R-H?

The module has no heat spreader and runs at 1.1 V; sustained load testing by the vendor confirms stability without additional cooling in the target chassis.

What is the idle and full-load power draw of this 1.1 V DDR5 SODIMM?

DDR5 at 1.1 V keeps power draw low; the vendor validates each stick under load so it will not exceed the platform's SODIMM power budget.

Which motherboard slot and BIOS version are required for this CSE-E102TF2 kit to initialise?

It fits a 262-pin DDR5 SODIMM slot on the Super X13SRN-H-WOHS board; the system-specific part number guarantees compatibility without a BIOS update.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.