We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 SODIMM sticks side by side, no heat spreaders

NEMIX RAM

NEMIX RAM CSE-E102TF2 32GB (2x16GB) DDR5 4800 CL40 memory upgrade

SKU CH-JZ9X-K96BE MPN CSE-E102TF2

A 32 GB DDR5 SODIMM kit running at 4800 MT/s with CL40 latency for compatible Supermicro systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB dual-channel kit doubles capacity for Supermicro IoT SuperServer SYS-E102-13R-E
  • DDR5 4800 MT/s CL40 delivers high bandwidth at standard latency
  • 1 V operation reduces power draw in dense server chassis
  • 262-pin SODIMM form factor fits compact 1U and edge platforms
  • Tested 1Rx8 Samsung Micron Hynix ICs ensure stable mission-critical uptime

System-specific DDR5 SODIMM kit

This 32 GB kit contains two 16 GB DDR5 4800 SODIMM modules built for the Supermicro IoT SuperServer SYS-E102-13R-E. It targets administrators who need validated memory for that exact platform without mixing untested parts.

Low-voltage unbuffered operation

Running at 1.1 V with CL40 latency, the unbuffered modules draw minimal power and produce little heat in the dense 1U chassis. No heat spreaders are fitted, so airflow through the server’s existing ducting handles thermals quietly under typical workloads.

Direct replacement for factory memory

The kit matches the server’s native DDR5 4800 specification and 262-pin form factor, so it slots in without BIOS changes. The upgrade is worthwhile when the original configuration shipped with less than 32 GB or when a second channel must be populated for bandwidth-sensitive tasks.

Highlights

  • 32 GB dual-channel kit doubles capacity for Supermicro IoT SuperServer SYS-E102-13R-E
  • DDR5 4800 MT/s CL40 delivers high bandwidth at standard latency
  • 1 V operation reduces power draw in dense server chassis
  • 262-pin SODIMM form factor fits compact 1U and edge platforms
  • Tested 1Rx8 Samsung Micron Hynix ICs ensure stable mission-critical uptime

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

How do I install the 262-pin DDR5 SODIMM modules in the SuperMicro SYS-E102-13R-E, and what step is often missed?

Power off the server, open the chassis, align each 1Rx8 module with the SODIMM slot key and press firmly until the side clips lock; the step often missed is seating both modules fully so the clips engage on both sides.

What maintenance or replacement will this 32GB kit need during its service life?

No scheduled maintenance is required; the modules have no heat spreader and run at 1.1V, so replacement is only needed if a module fails or capacity must be increased beyond 32GB.

What limit appears first when the memory runs sustained workloads at 4800 MT/s?

The CL40 latency at 1.10V is the primary limit; sustained throughput is bounded by the DDR5-4800 PC5-38400 specification of the installed 1Rx8 modules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.