We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 SODIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E102TF2 32GB (2x16GB) DDR5 4800 CL40 SODIMM memory upgrade

SKU CH-WHTV-PKTF1 MPN CSE-E102TF2

A 32 GB DDR5 SODIMM kit built for Supermicro SuperServer SYS-E102-13R-H systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB total capacity for demanding server workloads
  • DDR5 4800 speed with CL40 latency for responsive performance
  • 1 V operation reduces power draw in dense deployments
  • 262-pin SODIMM form factor fits SuperMicro IoT SuperServer SYS-E102-13R-H
  • Two 16 GB 1Rx8 modules enable dual-channel bandwidth

SuperMicro DDR5 4800 SODIMM Kit

This 32 GB kit contains two 16 GB DDR5 4800 SODIMM modules built for the SuperMicro IoT SuperServer SYS-E102-13R-H. Each stick runs at 1.1 V with CL40 latency and uses a 1Rx8 unbuffered non-ECC layout. The 262-pin form factor matches the server's memory slots exactly.

Fits SuperMicro SYS-E102-13R-H

The modules install directly into the system's two SODIMM slots without adapters or risers. Unbuffered operation keeps the signal path short for the platform's memory controller. Low 1.1 V draw leaves thermal headroom inside the compact chassis. No heat spreaders are fitted, so clearance above the slots stays open.

32 GB dual-channel capacity

Two ranks across two channels give 32 GB of addressable memory for virtualization hosts or edge workloads. The 4800 MT/s rate feeds the CPU without bottlenecking typical container densities. Workloads that exceed 32 GB or require ECC error correction will need a different platform or registered DIMMs.

Highlights

  • 32 GB total capacity for demanding server workloads
  • DDR5 4800 speed with CL40 latency for responsive performance
  • 1 V operation reduces power draw in dense deployments
  • 262-pin SODIMM form factor fits SuperMicro IoT SuperServer SYS-E102-13R-H
  • Two 16 GB 1Rx8 modules enable dual-channel bandwidth

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

Will the CL40 latency become the bottleneck during sustained workloads?

CL40 is the rated CAS latency at 4800 MT/s; under continuous load the timing remains fixed and does not degrade further.

How much heat and power should I expect from the 1.10 V modules running all day?

Each 16 GB module operates at 1.10 V without a heat spreader; power draw stays within standard DDR5 SODIMM limits and passive airflow in the chassis is sufficient.

Which slot count and pin layout must my Supermicro SYS-E102-13R-H already have for this kit to work?

The kit requires two free 262-pin DDR5 SODIMM slots; the server board provides exactly that configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.