We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM CSE-GS7A-000NBP3 128GB (4x32GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-WFYS-76D3A MPN CSE-GS7A-000NBP3

A 128GB kit of four 32GB DDR5 4800 CL40 ECC registered DIMMs for Supermicro workstations

  • Capacity128GB (4 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128GB total capacity for demanding server workloads
  • DDR5 4800 speed with CL40 latency for responsive performance
  • ECC registered design protects data integrity in critical systems
  • 1V operation reduces power draw per module
  • Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility

SuperMicro DDR5 4800 ECC RDIMM Kit

This 128GB kit contains four 32GB DDR5 4800 registered DIMMs built for SuperMicro platforms. Each module runs at 1.1V with CL40 latency and includes on-die ECC for data integrity. The 288-pin RDIMM form factor fits server and workstation motherboards that require registered memory. It is intended for administrators upgrading compatible SuperMicro systems.

Suits SuperMicro SYS-751A-I and X13DAI-T owners

Buyers who need ECC registered DDR5 for these specific SuperMicro models can install this kit directly. Systems that require unbuffered UDIMMs, lower-density modules, or a different pin count cannot use these DIMMs. Builders targeting consumer desktop boards or laptops should look elsewhere because the registered design and 288-pin DDR5 layout are not compatible.

Registered 1Rx4 DDR5 at 1.1V

The modules are single-rank 1Rx4 registered RDIMMs operating at 1.10V, a combination that determines whether the motherboard memory controller will initialise them. If the platform expects a different rank configuration, voltage, or unbuffered signalling, the kit will not post. Verify the system documentation for registered DDR5 4800 support before purchase.

Highlights

  • 128GB total capacity for demanding server workloads
  • DDR5 4800 speed with CL40 latency for responsive performance
  • ECC registered design protects data integrity in critical systems
  • 1V operation reduces power draw per module
  • Validated for SuperMicro SuperWorkstation SYS-751A-I compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K4
Capacity128GB (4 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (4X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How much power does the 1.1V DDR5 kit draw under sustained load?

Each module operates at 1.1V, the standard DDR5 voltage, so power draw stays low even when all four 32GB sticks run continuously in a Supermicro workstation.

What motherboard slot and chipset are required for this 288-pin RDIMM kit?

The kit needs a Supermicro motherboard with DDR5 RDIMM slots, such as the X13DAI-T or SYS-751A-I, that supports registered ECC memory at 4800 MT/s.

Can I mix these 1Rx4 CL40 modules with other DDR5 ECC RDIMMs of different rank or latency?

Mixing ranks or CAS latencies is not recommended; for stability, populate all channels with identical 1Rx4 CL40 modules like this kit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.