We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM CSE-GS7A-2000B 32GB (2x16GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-FRNQ-1MDM5 MPN CSE-GS7A-2000B

32 GB DDR5 ECC registered memory kit with two 16 GB modules at 4800 MT/s CL40 for Supermicro SuperWorkstation SYS-551A-T

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB total capacity from two 16 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth
  • ECC and registered design for data integrity
  • 10 V operation at CL40 latency
  • Validated for Supermicro SYS-551A-T workstation

32 GB DDR5 ECC RDIMM kit for Supermicro SYS-551A-T

This registered DDR5 kit contains two 16 GB modules rated at 4800 MT/s with CL40 latency. It is built for the Supermicro SuperWorkstation SYS-551A-T and the Super X13SWA-TF motherboard where ECC RDIMM memory is required.

Registered ECC with 1Rx8 organisation

The single specification that decides fit is the registered ECC RDIMM format combined with a 1Rx8 rank structure. Only systems expecting registered error-correcting DDR5 at 1.1 V with this exact pin-out and rank configuration will accept the kit.

Matched pair eliminates mixed-rank uncertainty

The two modules are packaged together as a tested 32 GB pair so the memory controller sees identical timing and rank behaviour on both channels. No additional software or accessories are included; the kit relies on the motherboard SPD data for automatic configuration.

Highlights

  • 32 GB total capacity from two 16 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth
  • ECC and registered design for data integrity
  • 10 V operation at CL40 latency
  • Validated for Supermicro SYS-551A-T workstation

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What does the 4800 MHz DDR5 rating mean once the modules are installed in a Supermicro workstation?

The 4800 MHz DDR5 rating sets the maximum JEDEC-standard data rate the kit will run at in a Supermicro SYS-551A-T or X13SWA-TF system, delivering PC5-38400 bandwidth at 1.10 V with CL40 latency.

How does the 288-pin RDIMM interface and registered ECC design affect what the memory controller can do?

The 288-pin DDR5 RDIMM interface adds a register between the DRAM and the memory controller, allowing the Supermicro platform to support higher capacities and maintain signal integrity with ECC error correction across both 16 GB 1Rx8 modules.

What physical clearance and slot requirements must the chassis meet for this 32 GB kit?

The kit uses standard-height 288-pin DDR5 RDIMM modules without heat spreaders, so it fits any Supermicro SYS-551A-T or X13SWA-TF DIMM slot that accepts registered ECC memory and provides 1.10 V power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.