We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green DDR5 RDIMM module 64GB 4800 CL40 288-pin no heat spreader

NEMIX RAM

NEMIX RAM CSE-GS7A-2000B 64GB DDR5 4800 CL40 2Rx4 1.1V 288-Pin ECC RDIMM memory upgrade

SKU CH-VTSQ-N3PGF MPN CSE-GS7A-2000B

64GB DDR5 4800 ECC RDIMM module with CL40 latency and 1.1V operation for Supermicro server and workstation platforms

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64GB capacity supports heavy server workloads
  • DDR5 4800 speed delivers high bandwidth
  • CL40 latency tuned for registered operation
  • ECC registered design ensures data integrity
  • 1V voltage reduces power consumption

64 GB DDR5 4800 ECC RDIMM

This single 64 GB module delivers DDR5 4800 speed with CL40 latency and registered ECC operation at 1.1 V. It is built for the SuperMicro SuperWorkstation SYS-551A-T and compatible X13SWA-TF platforms.

Upgrade from lower-capacity or non-ECC DDR5

Replacing smaller unbuffered sticks adds 64 GB of registered capacity in one slot while keeping the 4800 MT/s data rate. The jump is worthwhile when workloads demand ECC protection and higher density per DIMM.

Fits SuperMicro server and workstation boards

The 288-pin RDIMM installs directly into supported SuperMicro motherboards without extra cooling hardware. It frees remaining DIMM slots for future expansion while providing registered signal integrity for stable operation.

Highlights

  • 64GB capacity supports heavy server workloads
  • DDR5 4800 speed delivers high bandwidth
  • CL40 latency tuned for registered operation
  • ECC registered design ensures data integrity
  • 1V voltage reduces power consumption

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will this 288-pin DDR5 RDIMM fit the memory slots on a SuperMicro SuperWorkstation SYS-551A-T?

Yes, the 288-pin DDR5 RDIMM form factor matches the DDR5 slots on the SuperMicro SuperWorkstation SYS-551A-T.

What is the correct way to seat this registered ECC module so the system recognises the full 64 GB?

Align the notch on the module with the slot key, press straight down until both retention clips click, then verify in BIOS that the 64 GB DDR5 4800 module appears at 1.1 V.

When should I expect to replace this DDR5 4800 CL40 module in a 24/7 server workload?

DDR5 RDIMMs have no scheduled replacement interval; replace only if memory diagnostics report uncorrectable ECC errors or the module fails to train at 4800 MT/s.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.