We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM module with black chips, no heat spreader, gold edge connector

NEMIX RAM

NEMIX RAM DDR5 32GB 6400MHz CL52 2Rx8 ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-D6TD-MZ0H7

32GB DDR5 6400MHz CL52 2Rx8 1.1V ECC Registered RDIMM validated for Supermicro H14DSH motherboards

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact DDR5-6400 CL52 2Rx8 1.1V spec ensures full-speed recognition on Supermicro H14DSH
  • Registered ECC RDIMM offloads the controller and corrects single-bit errors for production stability
  • 288-pin RDIMM form factor matches the motherboard slot — no UDIMM or SODIMM confusion
  • 32 GB capacity per module lets you populate every slot at rated density
  • Lifetime replacement warranty and US-based technical support back the upgrade

32 GB DDR5-6400 ECC RDIMM for Supermicro H14DSH

This 32 GB registered DDR5 module runs at 6400 MHz with CL52 latency at 1.1 V. It uses a 2Rx8 organisation and a 288-pin RDIMM form factor with on-die ECC. The part is built for the Supermicro H14DSH motherboard and is intended for servers that require registered memory with error correction.

Verify DIMM population rules

Check the Supermicro H14DSH manual for the approved DIMM population order and maximum capacity per channel before ordering. Confirm that the board accepts 2Rx8 registered modules at the rated speed and voltage. Ensure the server chassis has the correct 288-pin DDR5 slots and that the BIOS version supports this memory configuration.

Replaces non-ECC or slower registered DDR5 modules

The upgrade is worthwhile when moving from unbuffered memory or lower-speed registered DDR5 that limits bandwidth or lacks error correction. It also fits when expanding capacity within the board's supported population rules. The jump is not justified if the system already runs matched 6400 MHz registered ECC modules at full population.

Highlights

  • Exact DDR5-6400 CL52 2Rx8 1.1V spec ensures full-speed recognition on Supermicro H14DSH
  • Registered ECC RDIMM offloads the controller and corrects single-bit errors for production stability
  • 288-pin RDIMM form factor matches the motherboard slot — no UDIMM or SODIMM confusion
  • 32 GB capacity per module lets you populate every slot at rated density
  • Lifetime replacement warranty and US-based technical support back the upgrade

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Does the box contain only the 32GB DDR5 6400MHz CL52 2Rx8 ECC RDIMM module or are extra parts included?

The package contains one 32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V CL52 288-pin ECC Registered RDIMM. No cables, brackets, heat spreaders or additional accessories are supplied.

Should I choose a different capacity or speed for the Supermicro H14DSH or is this 32GB 6400MHz CL52 kit the correct match?

This module is an exact-match upgrade specified at 32GB, DDR5-6400 (PC5-51200), 2Rx8, Registered ECC, 1.1V, CL52, 288-pin — the precise rank, voltage and timing the H14DSH memory controller expects for full-capacity recognition at rated speed.

Will the CL52 latency and 6400MHz rating deliver the stated performance once installed in the H14DSH?

Yes. The Registered (buffered) architecture offloads the memory controller so every populated slot runs at the full 6400MHz data rate with CL52 timing, while on-die ECC corrects single-bit errors to maintain stability under continuous server workloads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.