NEMIX RAM DDR5 4800 96GB 6x16GB ECC Registered RDIMM Supermicro H13SVW-NT memory upgrade
- 96GB (6 x 16GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
96GB DDR5 4800 registered ECC RDIMM at CL40, 1.1V, 2Rx4, 288-pin, validated for Supermicro H13SVW-NT-OS2
Size 96GB
This 96 GB DDR5-4800 registered ECC RDIMM is built for the Supermicro H13SVW-NT-OS2 motherboard. It delivers the precise rank, voltage and timing the platform expects so every slot is recognised at full capacity and rated speed.
The registered architecture offloads the memory controller, letting a fully populated system run continuously at the rated 4800 MT/s without the signal degradation seen on unbuffered modules. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during long-running workloads.
It upgrades systems currently limited by smaller registered DIMMs when the application demands maximum density per slot. The jump is worth it only if the motherboard manual confirms support for 96 GB modules in the required population order.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-9624K1 |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The module operates at 1.10V, the standard DDR5 voltage. Registered ECC architecture reduces electrical load on the memory controller, helping keep system power draw predictable when all slots are populated.
The board uses 288-pin DDR5 RDIMM slots. Consult the motherboard manual for supported capacities per slot, approved population order, and any BIOS settings needed before installing the 96GB kit.
The memory controller typically clocks all installed DIMMs to the lowest common speed and loosest timing. Mixing CL40 modules with slower DDR5 will force the kit to run at the slower modules' rated frequency and latency.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?