We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks without heat spreaders, 288-pin, 64GB kit

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 64GB (2x32GB) CL40 1.1V 2Rx8 memory upgrade for GIGABYTE MZ33-CP1

SKU CH-87ZS-KRZ4X

64 GB dual-channel DDR5 ECC registered kit, CL40 at 1.1 V, validated for the Gigabyte MZ33-CP1 server board

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Show 18 more configurations
  • 64 GB capacity in a 2 × 32 GB kit enables full server memory population
  • DDR5 4800 speed with CL40 timing matches the motherboard's rated frequency and latency
  • ECC and registered design correct single-bit errors and buffer signals for enterprise stability
  • 10 V operation at 2Rx8 rank aligns with the platform's voltage and rank requirements
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots exactly

Exact-match server upgrade

This 64 GB kit delivers two 32 GB DDR5 4800 RDIMMs built to the precise rank, voltage and timing the GIGABYTE MZ33-CP1 memory controller expects. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed while correcting single-bit errors on the fly.

Sustained-load behaviour

Registered buffering keeps electrical loading stable when all channels are filled, allowing the modules to hold their CL40 latency at 1.1 V through continuous workloads. ECC detection and correction operates in real time, preventing silent data corruption during long compute runs.

Thermals and power

Operating at 1.1 V without a heat spreader, the modules draw minimal power and rely on chassis airflow for cooling. The low-voltage DDR5 design reduces heat output compared with higher-voltage generations, keeping acoustic impact negligible in a properly ventilated server.

Highlights

  • 64 GB capacity in a 2 × 32 GB kit enables full server memory population
  • DDR5 4800 speed with CL40 timing matches the motherboard's rated frequency and latency
  • ECC and registered design correct single-bit errors and buffer signals for enterprise stability
  • 10 V operation at 2Rx8 rank aligns with the platform's voltage and rank requirements
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much heat does the 1.10 V DDR5 4800 kit produce under continuous load?

The modules run at 1.10 V with no heat spreader, so they generate modest heat typical for registered DDR5 at this voltage; ensure your server chassis provides adequate airflow across the 288-pin slots.

What motherboard slot and population rules does the GIGABYTE MZ33-CP1 require for this 64 GB kit?

The board needs 288-pin DDR5 RDIMM slots; install the two 32 GB modules in the channels and order specified in the MZ33-CP1 manual to run at the rated 4800 MT/s.

Will the 2Rx8 registered ECC modules work alongside any existing RDIMMs I keep in the server?

Mixing ranks or speeds can force the memory controller to down-clock all slots; for stable operation at 4800 MT/s populate every channel with identical 2Rx8 CL40 modules per the board's population guide.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.