We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 5600 256GB 2x128GB ECC RDIMM CL46 1.1V 4Rx4 Supermicro X14SDW-36CE-SP9F memory upgrade

SKU CH-8XQS-TYWJ7

256 GB DDR5 5600 MHz ECC Registered RDIMM kit (2 × 128 GB, CL46, 1.1 V, 4Rx4) validated for Supermicro X14SDW-36CE-SP9F motherboards

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from a matched 2 x 128 GB kit
  • DDR5-5600 speed with CL46 latency for rated server throughput
  • Registered ECC architecture with 4Rx4 organisation corrects single-bit errors automatically
  • 1 V operation matches the board's memory-controller specification exactly
  • Validated for the Supermicro X14SDW-36CE-SP9F motherboard's 288-pin RDIMM slots

Exact-match server upgrade

This NEMIX RAM kit delivers 256 GB of DDR5 memory in two 128 GB Registered ECC RDIMMs built for the Supermicro X14SDW-36CE-SP9F motherboard. The modules operate at 5600 MT/s with CL46 latency at 1.1 V and use a 4Rx4 organisation that matches the board's memory controller expectations.

288-pin Registered ECC form factor

The DDR5 RDIMM format with 288 pins and registered buffering is the single specification that determines fitment; the board requires this exact physical and electrical interface and will not accept UDIMM or SODIMM alternatives.

Full-population capacity headroom

Two dual-rank modules fill both DIMM slots at the rated 5600 MT/s speed, providing 256 GB of error-correcting memory for virtualisation and database workloads. Adding further capacity would require a motherboard with additional memory channels or higher-density DIMMs not supported by this platform.

Highlights

  • 256 GB total capacity from a matched 2 x 128 GB kit
  • DDR5-5600 speed with CL46 latency for rated server throughput
  • Registered ECC architecture with 4Rx4 organisation corrects single-bit errors automatically
  • 1 V operation matches the board's memory-controller specification exactly
  • Validated for the Supermicro X14SDW-36CE-SP9F motherboard's 288-pin RDIMM slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How does the 5600 MT/s speed translate when the kit is installed in the Supermicro X14SDW-36CE-SP9F?

The modules run at DDR5-5600 (PC5-44800) with CL46 timing at 1.1 V, delivering the full rated throughput the board's memory controller expects when all slots are populated.

What does the 288-pin RDIMM interface cap in practice?

The 288-pin registered DDR5 form factor supports ECC and registered signalling, allowing every slot to operate at the full 256 GB capacity without the electrical loading limits of unbuffered modules.

What physical clearance does the 2 x 128 GB kit need to fit the motherboard?

Each 288-pin RDIMM uses the standard DDR5 height with no heat spreader, so it fits the Supermicro X14SDW-36CE-SP9F DIMM slots following the board's documented population order.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.