We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row, black chips, no heat spreaders, gold edge connectors

NEMIX RAM

NEMIX RAM DDR5 5600 288GB 6x48GB CL46 1.1V ECC RDIMM memory upgrade

SKU CH-2S8V-RPJAT

A 288GB kit of six 48GB DDR5-5600 registered ECC RDIMMs at 1.1V CL46, validated for the Gigabyte MZ33-AR1 motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Show 24 more configurations
  • 288 GB total capacity from six 48 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth for server workloads
  • Registered ECC design corrects single-bit errors on the fly
  • CL46 latency at 1.1 V for efficient operation
  • Verified fit for GIGABYTE MZ33-AR1 motherboard

Server memory kit for GIGABYTE MZ33-AR1

This 288GB kit contains six 48GB DDR5 RDIMM modules built for the GIGABYTE MZ33-AR1 motherboard. Registered ECC architecture allows every slot to be populated at full capacity while correcting single-bit errors. The kit targets administrators upgrading compatible enterprise servers.

Registered ECC DDR5 5600 CL46 1.1V

The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.1V and a 2Rx8 rank structure. These exact timing, voltage and rank parameters match the memory controller requirements so the system recognises the full 288GB at rated speed.

Thermals and power in normal use

Operating at 1.1V keeps power draw low for a fully populated six-module configuration. No heat spreaders are fitted, so airflow across the bare modules handles cooling. Registered buffering reduces electrical load on the memory controller during sustained workloads.

Highlights

  • 288 GB total capacity from six 48 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth for server workloads
  • Registered ECC design corrects single-bit errors on the fly
  • CL46 latency at 1.1 V for efficient operation
  • Verified fit for GIGABYTE MZ33-AR1 motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 5600 MHz speed actually deliver once the kit is installed in a GIGABYTE MZ33-AR1?

The modules run at the rated DDR5-5600 data rate with CL46 timings at 1.1 V, so the memory controller recognises all 288 GB at full frequency without manual tuning.

How does the PC5-44800 designation limit real-world throughput?

PC5-44800 is the peak transfer rate for DDR5-5600; sustained bandwidth will be lower and depends on the CPU's memory controller and the board's trace layout.

Will these 288-pin RDIMMs physically seat in the MZ33-AR1's DIMM slots?

Yes — the kit uses the 288-pin Registered RDIMM form factor that the MZ33-AR1 requires; UDIMMs or SODIMMs would not fit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.