We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 576GB 12x48GB 5600MHz CL46 ECC Registered RDIMM memory upgrade

SKU CH-TNYZ-XBVPM

A 576 GB registered ECC DDR5 kit of twelve 48 GB modules running at 5600 MHz CL46 for GIGABYTE MZ33-AR1 servers

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 12X48GB

Show 24 more configurations
  • 576 GB total capacity from 12 modules of 48 GB each
  • DDR5 5600 MHz speed with CL46 latency for rated server performance
  • Registered ECC RDIMM design offloads the memory controller and corrects single-bit errors
  • 1 V operating voltage matches the board's DDR5 specification
  • 288-pin 2Rx8 form factor verified for the GIGABYTE MZ33-AR1 motherboard

Exact-match server kit

This 576GB kit contains 12 modules of 48GB DDR5 RDIMM memory rated at 5600MHz with CL46 latency and 1.1V operation. It is built for the GIGABYTE MZ33-AR1 motherboard and uses registered ECC architecture with 2Rx8 organisation.

Suited for full-capacity server builds

The registered design and ECC support make this kit appropriate for production servers that require maximum population and error correction. It is not for systems that accept only unbuffered UDIMMs or SODIMMs, nor for platforms that cannot address 48GB per slot.

Verify motherboard population rules

Check the MZ33-AR1 manual for approved DIMM population order and maximum supported capacity per channel before ordering. Ensure the board firmware is current enough to recognise the full 576GB configuration at the rated 5600MHz speed.

Highlights

  • 576 GB total capacity from 12 modules of 48 GB each
  • DDR5 5600 MHz speed with CL46 latency for rated server performance
  • Registered ECC RDIMM design offloads the memory controller and corrects single-bit errors
  • 1 V operating voltage matches the board's DDR5 specification
  • 288-pin 2Rx8 form factor verified for the GIGABYTE MZ33-AR1 motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does my GIGABYTE MZ33-AR1 motherboard need a specific BIOS version or CPU to recognise all 12 DDR5 48GB RDIMMs?

The kit is validated for the GIGABYTE MZ33-AR1 at DDR5-5600; consult the motherboard manual for the approved population order and any BIOS revision required for full 576GB capacity.

Can I keep my existing DDR5 5600 RDIMMs and add this 12-module kit to the remaining slots?

All slots must use identical 2Rx8 registered ECC modules at 1.1V CL46; mixing different ranks, capacities or timings will prevent the server from booting at the rated 5600MHz speed.

How do I confirm the 576GB kit is running at DDR5-5600 with ECC active after installation?

Enter the BIOS or use a hardware inventory tool to verify all 12 DIMMs show 48GB each, speed reads 5600MHz (PC5-44800) and ECC status reports enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.