We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 6400 384GB (4x96GB) ECC Registered RDIMM MZ33-CP1 memory upgrade

SKU CH-3JH0-GJKJ7

384 GB DDR5 server memory kit with four 96 GB registered ECC RDIMMs at 6400 MT/s, CL52, 1.1 V, validated for the Gigabyte MZ33-CP1 motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Show 24 more configurations
  • 384 GB total capacity with four 96 GB modules
  • DDR5 6400 speed rated at PC5-51200 bandwidth
  • Registered ECC design with 2Rx4 organisation for multi-slot stability
  • 1 V operation at CL52 latency matching controller specs
  • Verified fit for GIGABYTE MZ33-CP1 motherboard with 288-pin RDIMM form factor

Exact-Match Server Kit

This 384GB kit contains four 96GB DDR5 6400 Registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MZ33-CP1 motherboard expects. It targets administrators who need maximum supported capacity in a validated configuration.

Sustained Enterprise Operation

Registered architecture buffers every address and command so all four slots run fully populated at rated speed without overloading the memory controller. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during continuous workloads.

Capacity and Compatibility Step

The kit replaces smaller or mixed-capacity DDR5 RDIMM sets when the platform documentation confirms 96GB per slot support and the required population order. It is not suited for boards limited to UDIMM form factors or lower maximum densities.

Highlights

  • 384 GB total capacity with four 96 GB modules
  • DDR5 6400 speed rated at PC5-51200 bandwidth
  • Registered ECC design with 2Rx4 organisation for multi-slot stability
  • 1 V operation at CL52 latency matching controller specs
  • Verified fit for GIGABYTE MZ33-CP1 motherboard with 288-pin RDIMM form factor

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.1 V DDR5 6400 kit draw when the GIGABYTE MZ33-CP1 runs fully populated 24/7?

Each 96 GB RDIMM operates at 1.10 V. Total system power depends on the motherboard's memory controller and workload; consult the MZ33-CP1 manual for platform-level figures.

What motherboard slot and firmware support are required for this 288-pin Registered ECC kit to function?

The kit needs a GIGABYTE MZ33-CP1 motherboard with DDR5 RDIMM slots and a BIOS that recognises 2Rx4 Registered ECC modules at DDR5-6400.

Can I mix these CL52 2Rx4 modules with older DDR5 RDIMMs of different rank or latency on the same MZ33-CP1 board?

Mixing ranks or timings is not recommended; the MZ33-CP1 memory controller expects identical 2Rx4 CL52 modules in every populated channel for stable operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.