We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green 288-pin DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM DDR5 6400 576GB 6x96GB ECC Registered RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-8GWF-JAAV7

A 576GB kit of six 96GB DDR5 6400 ECC Registered RDIMMs tuned for the Supermicro H14DSG-OM motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 576GB total capacity with six 96GB modules for maximum server density
  • DDR5-6400 speed rated at PC5-51200 for high-throughput workloads
  • Registered ECC architecture with 2Rx4 organization for full-population stability
  • CL52 latency at 1.1V for efficient enterprise operation
  • Validated compatibility with Supermicro H14DSG-OM motherboard

Exact-match DDR5 upgrade

This 576 GB kit contains six 96 GB DDR5-6400 registered ECC RDIMMs built for the Supermicro H14DSG-OM motherboard. Each module runs at 1.1 V with CL52 timing and a 2Rx4 organisation. The registered design lets the memory controller drive every slot at full speed.

Replaces partial or slower memory

Swapping smaller RDIMMs or lower-frequency kits for this set restores the full 576 GB capacity the board can address and keeps all channels running at DDR5-6400. The upgrade is worth it when your workloads need the maximum registered ECC capacity this platform supports.

Verify population rules first

Check the motherboard manual for approved DIMM population order, maximum capacity per channel, and any BIOS version requirements before installing. Confirm the board uses 288-pin registered DDR5 slots and that your CPU and firmware support 2Rx4 modules at this density.

Highlights

  • 576GB total capacity with six 96GB modules for maximum server density
  • DDR5-6400 speed rated at PC5-51200 for high-throughput workloads
  • Registered ECC architecture with 2Rx4 organization for full-population stability
  • CL52 latency at 1.1V for efficient enterprise operation
  • Validated compatibility with Supermicro H14DSG-OM motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H14DSG-OM motherboard slots?

Yes, the 288-pin Registered DDR5 form factor matches the board's DIMM slots exactly, so the six 96 GB modules install without adapters or converters.

What population order should I follow when installing the six 96 GB 2Rx4 RDIMMs in the Supermicro H14DSG-OM?

Consult the motherboard manual for the approved DIMM population sequence; the kit is spec-matched to the board's rules, but the exact slot order is defined by the system documentation.

Do these 1.1 V DDR5 ECC RDIMMs require any firmware updates or periodic maintenance after installation?

No firmware updates or scheduled maintenance are needed; ECC corrects single-bit errors automatically, and the modules are covered by a lifetime replacement warranty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.