We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks with black chips no heat spreader

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 96GB (2×48GB) CL52 1.1V 2Rx8 Supermicro H14DSG-OM memory upgrade

SKU CH-GVF2-AEC59

96 GB DDR5 ECC registered server memory kit with two 48 GB modules at 6400 MT/s, CL52, 1.1 V, 2Rx8, 288-pin RDIMM for Supermicro H14DSG-OM motherboards

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96 GB total capacity across two 48 GB modules
  • DDR5-6400 speed with CL52 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DSG-OM

Server Memory Upgrade

This NEMIX RAM kit delivers 96GB of DDR5 registered ECC memory in two 48GB modules. It is built for administrators upgrading a Supermicro H14DSG-OM motherboard that requires registered DIMMs with error correction. The 2Rx8 organisation matches the platform's memory controller expectations for full-capacity operation.

Motherboard Verification

Confirm that your H14DSG-OM manual approves 48GB RDIMMs and the required population order for a two-module installation. The board accepts 288-pin DDR5 registered modules only; unbuffered or SODIMM variants will not fit or function. Check the qualified-vendor list for the exact part number MR51200-4828K2 before ordering.

Thermals and Power

Each module runs at 1.10V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all slots are populated. Typical operation stays within the DDR5 6400 CL52 specification at standard server inlet temperatures.

Highlights

  • 96 GB total capacity across two 48 GB modules
  • DDR5-6400 speed with CL52 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DSG-OM

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

What comes in the kit and do I need anything else to install it?

The kit contains two 48 GB DDR5 6400 RDIMM modules for a total of 96 GB. No extra parts are required for installation in a compatible Supermicro H14DSG-OM motherboard.

Why choose the 96 GB 2×48 GB kit instead of a different capacity?

This kit provides two 2Rx8 registered ECC modules at 1.10 V CL52 that match the Supermicro H14DSG-OM memory population rules for full-capacity operation at DDR5 6400 speed.

Will the system actually run at the rated 6400 MT/s once the modules are installed?

Yes, the modules are spec-matched to the board's DDR5 6400 (PC5-51200) timing and voltage so the memory controller recognises them at full speed when populated per the manual.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.