We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks, black chips, no heat spreader, 288 pins, labelled NEMIX RAM

NEMIX RAM

NEMIX RAM DDR5 6400 ECC Registered RDIMM 256GB 2x128GB CL52 1.1V 4Rx4 memory upgrade

SKU CH-X58N-HPZ5K

256 GB DDR5 registered ECC server memory kit, two 128 GB modules at 6400 MHz CL52 1.1 V, validated for Supermicro X14SDV-42C-SP3F

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

  • 256GB total capacity in a 2x128GB kit for maximum server memory density
  • DDR5 6400 speed with CL52 latency delivers rated performance on supported platforms
  • Registered ECC architecture with 4Rx4 organisation offloads the controller and corrects single-bit errors
  • 1V operating voltage matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor verified for Supermicro X14SDV-42C-SP3F compatibility

Exact-match DDR5 server kit

This NEMIX RAM kit supplies 256 GB as two 128 GB DDR5-6400 RDIMMs built to the PC5-51200 standard. The modules are ECC registered with a 4Rx4 organisation and operate at 1.1 V CL52, matching the memory controller expectations of the Supermicro X14SDV-42C-SP3F motherboard.

Sustained-load behaviour

Registered buffering offloads the memory controller so every slot can remain fully populated at rated speed without timing regressions. ECC circuitry detects and corrects single-bit errors on the fly, preventing silent data corruption during long-running workloads.

Thermals and power

Each DIMM runs at the standard 1.1 V without a heat spreader, relying on chassis airflow for cooling. The low-voltage DDR5 design keeps power draw modest while the registered architecture reduces electrical loading on the motherboard.

Highlights

  • 256GB total capacity in a 2x128GB kit for maximum server memory density
  • DDR5 6400 speed with CL52 latency delivers rated performance on supported platforms
  • Registered ECC architecture with 4Rx4 organisation offloads the controller and corrects single-bit errors
  • 1V operating voltage matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor verified for Supermicro X14SDV-42C-SP3F compatibility

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does each 128 GB DDR5-6400 RDIMM draw at its rated 1.1 V?

Each module operates at 1.1 V; the DDR5 standard defines the voltage but does not publish a per-DIMM wattage figure.

What motherboard slot and chipset must I already have for this 256 GB kit to work?

A Supermicro X14SDV-42C-SP3F motherboard with 288-pin DDR5 RDIMM slots is required.

Will these 4Rx4 registered ECC modules run in a system that currently uses 2Rx4 or 1Rx4 DDR5 RDIMMs?

The memory controller must support 4Rx4 population; mixing ranks is not guaranteed and the board manual should be consulted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.