We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM DDR5 96GB 4800 CL40 2Rx4 1.1V ECC Registered RDIMM Supermicro H14SSF memory upgrade

SKU CH-TVRR-2G509

96GB DDR5 4800 ECC registered RDIMM with 2Rx4 rank and CL40 latency, validated for Supermicro H14SSF motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB

Show 24 more configurations
  • 96 GB DDR5-4800 ECC RDIMM for full-capacity server memory
  • 10 V CL40 timing matches the Supermicro H14SSF controller specification
  • 2Rx4 registered design keeps every slot stable at rated speed
  • 288-pin RDIMM form factor fits the exact motherboard slot required
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Exact-match DDR5-4800 ECC RDIMM

This 96GB registered DIMM runs at DDR5 4800 with CL40 latency and 1.10V. It is built for the Supermicro H14SSF motherboard and matches the board's required rank, voltage and timing so the memory controller recognises the full capacity at rated speed.

288-pin registered form factor

The module uses a 288-pin RDIMM layout with 2Rx4 organisation and no heat spreader. Registered buffering offloads the memory controller, allowing every slot to run fully populated while on-die ECC corrects single-bit errors to prevent silent data corruption and unplanned reboots.

Platform-specific population rules

Supported capacities and approved DIMM population order vary by server model and are not universal. The system or motherboard manual must be consulted before purchase to confirm the exact configuration this upgrade requires.

Highlights

  • 96 GB DDR5-4800 ECC RDIMM for full-capacity server memory
  • 10 V CL40 timing matches the Supermicro H14SSF controller specification
  • 2Rx4 registered design keeps every slot stable at rated speed
  • 288-pin RDIMM form factor fits the exact motherboard slot required
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the DDR5 4800 interface cap the module at PC5-38400 bandwidth?

Yes, the DDR5 4800 rating corresponds to PC5-38400, which is the maximum standard bandwidth this module delivers.

Will the 288-pin RDIMM form factor fit the Supermicro H14SSF motherboard slots?

Yes, the 288-pin Registered DIMM is the exact form factor the H14SSF requires; it will not accept UDIMM or SODIMM modules.

What is the correct installation step for this registered ECC memory on the H14SSF?

Consult the motherboard manual for the approved DIMM population order and install modules in the specified sequence so the server recognises the full 96GB capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.