NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 1.10V UDIMM memory upgrade
- 64GB (2 x 32GB)
- DDR5 4800 (PC5 3840…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
Dual-channel 64 GB kit with two 32 GB DDR5 5600 CL46 unbuffered UDIMMs at 1.10 V for MSI B760M Project Zero motherboards
Capacity 64GB 2X32GB
This 64 GB kit is built specifically for the MSI B760M Project Zero motherboard. It suits builders and upgraders who need matched modules for that platform without guessing at compatibility. Buyers using a different board or a four-slot configuration should verify support elsewhere.
The kit runs at DDR5 5600 with a CL46 latency at 1.1 V and uses a 2Rx8 organisation across two 32 GB sticks. That speed, voltage and rank combination is what the Project Zero firmware expects; a different data rate or rank layout can prevent the system from posting.
The 288-pin UDIMM modules have no heat spreader, so they sit low in the slots and clear most CPU coolers. Align the notch, press firmly until the latches click, and enable the XMP profile in BIOS to reach the rated 5600 MT/s. A common mistake is leaving the kit at the default JEDEC speed because the profile was not activated.
| Brand | NEMIX RAM |
|---|---|
| Series | MSI Gaming Motherboard Compatible Series Memory |
| Model | MSI DDR5 5600MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | MSI |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit runs at DDR5 5600, which is PC5-44800 bandwidth, delivering that data rate when the motherboard and processor support the same JEDEC profile.
As a 288-pin DDR5 UDIMM, it fits standard desktop DIMM slots and operates at 1.1 V unbuffered, so maximum throughput is capped by the board's DDR5 controller and the CL46 latency.
Each module is a standard-height 288-pin UDIMM with no heat spreader, drawing 1.10 V, so they install in adjacent DDR5 slots without extra clearance or auxiliary power.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?