We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM ME25600-628K4 64GB (4x16GB) DDR4 3200 CL22 ECC UDIMM memory upgrade

SKU CH-ERPF-BGF6M

ECC UDIMM kit provides 64GB of DDR4 3200 memory in four 16GB modules with CL22 latency and 1.2V operation

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB capacity for demanding workloads using four 16 GB modules
  • ECC UDIMM detects and corrects single-bit errors for data integrity
  • DDR4 3200 speed with CL22 latency for responsive system performance
  • 2 V operation reduces power draw and heat output
  • Validated for ASUS ROG Crosshair VIII Hero X570 motherboard compatibility

64 GB DDR4 3200 ECC kit for ASUS X570

This NEMIX RAM kit provides 64 GB of DDR4 3200 memory in four 16 GB unbuffered UDIMM modules. Each stick runs at 1.2 V with CL22 latency and includes on-die ECC for error correction. The 288-pin modules are validated for the ASUS ROG Crosshair VIII Hero motherboard on the AMD X570 platform.

Suited for ECC-capable workstations.

Builders who need data integrity on a compatible ASUS X570 system will benefit from the ECC function. Systems that cannot enable ECC in the BIOS or that require registered DIMMs cannot use this kit. Buyers seeking higher frequencies or lower latencies should look elsewhere.

Four-slot population on a validated X570 board

The kit fills all four DIMM slots on the supported motherboard, delivering the full 64 GB capacity without mixing modules. It operates at the standard 1.2 V DDR4 voltage, leaving headroom for CPU and GPU power budgets. No heat spreaders are fitted, so airflow around the slots remains unobstructed.

Highlights

  • 64 GB capacity for demanding workloads using four 16 GB modules
  • ECC UDIMM detects and corrects single-bit errors for data integrity
  • DDR4 3200 speed with CL22 latency for responsive system performance
  • 2 V operation reduces power draw and heat output
  • Validated for ASUS ROG Crosshair VIII Hero X570 motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesASUS Server Motherboard Compatible Series Memory
ModelASUS DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-628K4
Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASUS
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

What motherboard slot count and DDR generation must my board provide for this 288-pin DDR4 kit?

The kit requires four 288-pin DDR4 DIMM slots; each module is a 16 GB unbuffered ECC UDIMM.

Will the CL22 timing and 3200 MT/s speed run automatically with the X570 platform?

The modules operate at 3200 MT/s with CL22 at 1.2 V; enable the XMP profile in BIOS to reach the rated speed.

How can I confirm the 64 GB ECC capacity is active after installation?

Check the BIOS memory summary or OS tools — they should report 64 GB total and show ECC enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.