We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM MR25600-324K8 256GB (8x32GB) DDR4 3200 CL22 ECC RDIMM memory upgrade

SKU CH-M610-JQ17V

Eight-module 256 GB DDR4 3200 ECC RDIMM kit with CL22 latency for Gigabyte MC62-G40 and MC62-G41 server motherboards

  • Capacity256GB (8 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Massive 256 GB capacity for heavy workloads
  • Eight 32 GB modules fill every slot
  • DDR4 3200 speed keeps data flowing
  • ECC registered design guards data integrity
  • Built for Gigabyte MC62-G40 and MC62-G41

256 GB ECC RDIMM kit for Gigabyte servers

This 256 GB kit contains eight 32 GB DDR4 3200 RDIMM modules built with ECC and registered signalling. It targets IT professionals who need maximum capacity on Gigabyte MC62-G40 or MC62-G41 motherboards for virtualization, databases or high-density compute workloads.

1.2 V operation with no heat spreaders

Each module runs at 1.20 V with a CL22 latency profile, drawing minimal power while maintaining stability under sustained server loads. The bare PCB design relies on chassis airflow rather than integrated spreaders, so adequate case ventilation keeps thermals in check without adding acoustic noise.

288-pin 2Rx4 layout demands full population

The 2Rx4 organisation across all eight slots means the memory controller sees a heavy electrical load; mixing with other capacities or ranks is not supported. Installers must fill every DIMM slot on the target Gigabyte board to achieve the rated 3200 MT/s speed and preserve signal integrity.

Highlights

  • Massive 256 GB capacity for heavy workloads
  • Eight 32 GB modules fill every slot
  • DDR4 3200 speed keeps data flowing
  • ECC registered design guards data integrity
  • Built for Gigabyte MC62-G40 and MC62-G41

Specifications

BrandNEMIX RAM
SeriesGigabyte Server Motherboard Compatible Series Memory
ModelGigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-324K8
Capacity256GB (8 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemGIGABYTE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (8X32GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 288-pin DDR4 RDIMM modules in the Gigabyte MC62-G40 or MC62-G41, and which slot order is correct?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until the retention clips click, then populate all eight channels in the order shown in the motherboard manual for 2Rx4 registered DIMMs.

What maintenance or replacement will this 256GB ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts; routine care is limited to keeping the server's air filters clean so the 1.20V DIMMs stay within thermal limits, and replacing any stick that reports corrected ECC errors.

What limit appears first when the 3200 CL22 registered memory runs sustained workloads?

The CL22 latency at 3200 MT/s sets the bandwidth ceiling, and the 2Rx4 organisation means the memory controller reaches its rank-per-channel limit before thermal throttling becomes a factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.