We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM MR25600-624K4 64GB (4x16GB) DDR4 3200 CL22 ECC RDIMM memory upgrade

SKU CH-57CH-HSD9N

A 64 GB DDR4-3200 registered ECC kit of four 16 GB RDIMMs at CL22 and 1.2 V for MSI WS WRX80 workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 64GB 4X16GB

Show 4 more configurations
  • 64GB total capacity from four 16GB modules for large workloads
  • DDR4 3200 speed rated at PC4-25600 for high throughput
  • ECC registered RDIMM design detects and corrects data errors
  • CL22 latency at 1.2V for stable server operation
  • 288-pin 2Rx4 layout built for MSI WS WRX80 motherboards

MSI WRX80 Server Memory Kit

This 64GB kit contains four 16GB DDR4 3200 registered ECC RDIMMs built for MSI WS WRX80 motherboards. Each module runs at 1.2V with CL22 latency and a 2Rx4 organisation. The registered design adds a buffer that stabilises heavy multi-module loads in server and workstation environments.

Replacing Non-ECC or Unbuffered DIMMs

Moving from standard unbuffered memory to this registered ECC kit adds error correction and signal buffering that multi-socket platforms require. The upgrade is worth it when workloads demand data integrity across all 64GB and the motherboard specifies registered modules.

64GB Capacity for Virtualisation and Databases

Four ranks per channel give the memory controller enough headroom for dozens of virtual machines or large in-memory databases. The kit reaches its limit when applications need more than 64GB or when the platform requires speeds beyond DDR4 3200.

Highlights

  • 64GB total capacity from four 16GB modules for large workloads
  • DDR4 3200 speed rated at PC4-25600 for high throughput
  • ECC registered RDIMM design detects and corrects data errors
  • CL22 latency at 1.2V for stable server operation
  • 288-pin 2Rx4 layout built for MSI WS WRX80 motherboards

Specifications

BrandNEMIX RAM
SeriesMSI Server/Workstation Motherboard Compatible Series Memory
ModelMSI DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-624K4
Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMSI
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 288-pin DDR4 RDIMM modules fit the memory slots on my MSI WS WRX80 motherboard?

Yes, the 288-pin DDR4 RDIMM form factor matches the registered DIMM slots on the MSI WS WRX80 motherboard.

Do I need to populate all eight slots on the WRX80 board, or can I install this 4-module kit in specific channels?

Install the four 16 GB modules in the primary channel slots (usually DIMM_A1, B1, C1, D1) for quad-channel operation; leave the remaining four slots empty unless expanding later.

Will the Samsung, Micron or Hynix DRAM chips used in these modules require any firmware updates or special cooling over time?

No firmware updates are needed for the DRAM chips; the modules run at 1.2 V without heat spreaders, so ensure adequate case airflow for long-term stability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.