We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 ECC RDIMM modules in static bags

NEMIX RAM

NEMIX RAM MR25600-818K6 48GB (6x8GB) DDR4 3200 ECC RDIMM memory upgrade

SKU CH-A0EA-ZTTYZ

48 GB DDR4 ECC registered server memory kit running at 3200 MHz with CL22 latency for ThinkMate rackmount systems

  • Capacity48GB (6 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 48 GB capacity across six 8 GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth
  • ECC registered design protects data integrity
  • 20 V operation reduces power draw
  • Validated for Thinkmate RAX-PT rackmount servers

Compatible 48GB DDR4 ECC RDIMM Kit

This NEMIX RAM kit supplies 48GB across six 8GB DDR4 3200 registered DIMMs built for ThinkMate RAX-PT rackmount servers. Each module runs at 1.2V with CL22 latency and includes on-die ECC for data integrity in mission-critical workloads.

Upgrade from lower-capacity or non-ECC memory

The jump is worthwhile when your ThinkMate RAX-PT10-11A1, RAX-PT8-12A1 or RAX-PT12-12A1 needs more than the factory configuration provides or when unbuffered modules cause instability. Registered signalling and ECC let the platform scale to higher densities without signal degradation.

Suits ThinkMate RAX-PT rackmount deployments

IT teams managing these specific ThinkMate servers gain validated compatibility and lifetime replacement coverage. Builders using consumer motherboards, workstations that require unbuffered DIMMs, or systems limited to fewer than six slots should look elsewhere.

Highlights

  • 48 GB capacity across six 8 GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth
  • ECC registered design protects data integrity
  • 20 V operation reduces power draw
  • Validated for Thinkmate RAX-PT rackmount servers

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K6
Capacity48GB (6 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content48GB (6X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the 288-pin DDR4 RDIMM form factor fit the memory slots in a THINKMATE RAX-PT10-11A1 rackmount server?

Yes, the kit uses the standard 288-pin DDR4 RDIMM form factor required by the listed THINKMATE rackmount servers.

What is the correct sequence for installing all six 8 GB modules so the server recognises the full 48 GB capacity?

Populate the DIMM slots in the order specified by the server manual, typically filling one channel per CPU first, then the second channel, to enable registered ECC operation at 3200 MT/s.

When should the registered ECC modules be replaced if correctable error counts start rising in the server management log?

Replace the modules once the platform firmware reports a sustained increase in correctable ECC errors, indicating cell wear on the Samsung, Micron or Hynix DRAM chips.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.