We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM MR51200-724K6 768GB (6×128GB) DDR5 6400 ECC Registered RDIMM memory upgrade

SKU CH-3WFV-80ASA

768GB DDR5-6400 ECC Registered RDIMM kit in six 128GB modules at 1.1V CL52, validated for the GIGABYTE MZ73-LM1 motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 768GB 6X128GB

Show 24 more configurations
  • 768 GB total capacity across six 128 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation matches the motherboard specification for stable full-population performance
  • Verified compatibility with the Gigabyte MZ73-LM1 motherboard for exact-fit installation

Exact-Match 768GB Kit for GIGABYTE MZ73-LM1

This 768GB kit contains six 128GB DDR5 6400 RDIMMs built to the GIGABYTE MZ73-LM1 motherboard's exact specifications. Registered ECC architecture with 2Rx4 organisation and CL52 timing ensures the memory controller recognises full capacity at rated speed. The 1.10V modules use major OEM Samsung, Micron or Hynix components without heat spreaders.

Sustained Load Stability

Registered buffering offloads the memory controller so all six slots remain stable at full population during continuous server workloads. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots under prolonged stress. The 1.10V operating voltage maintains consistent power draw across extended duty cycles.

DDR5 6400 Interface Limits

The PC5-51200 interface delivers 6400 MT/s bandwidth within the DDR5 standard's electrical and timing constraints. CL52 latency and 2Rx4 rank density define the practical throughput ceiling for this registered DIMM topology. Motherboard memory-population rules and maximum supported capacity per slot govern final configuration possibilities.

Highlights

  • 768 GB total capacity across six 128 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation matches the motherboard specification for stable full-population performance
  • Verified compatibility with the Gigabyte MZ73-LM1 motherboard for exact-fit installation

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 1.10 V registered ECC design keep heat and power draw low when all six 128 GB modules run at DDR5 6400 continuously?

The kit operates at 1.10 V with registered buffering, which reduces electrical load on the memory controller and helps maintain stable thermals during sustained full-capacity workloads.

Must the GIGABYTE MZ73-LM1 motherboard already be installed to use this 6 × 128 GB RDIMM kit?

Yes, the modules are 288-pin DDR5 RDIMMs validated for the GIGABYTE MZ73-LM1, so that motherboard — or another platform with identical DDR5 RDIMM slots and population rules — is required.

Can I mix these 2Rx4 CL52 registered ECC DIMMs with older registered ECC modules of different rank or speed in the same server?

Mixing ranks, speeds, or latencies is not recommended; the motherboard's memory population rules should be followed to ensure all slots run at the rated DDR5 6400 CL52 configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.