We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM MR51200-924K2 128GB 2x64GB DDR5 6400 CL52 ECC Registered RDIMM memory upgrade

SKU CH-WEMN-4F4CP

128 GB DDR5 ECC registered RDIMM kit (2 × 64 GB) at 6400 MT/s CL52 1.1 V, validated for the Gigabyte MZ73-LM2 motherboard

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Show 24 more configurations
  • 128 GB capacity from two 64 GB modules enables large workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput
  • Registered ECC design corrects errors and supports full population
  • 10 V operation matches the motherboard specification exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM2 board

System-Specific DDR5 ECC Kit

This 128 GB kit contains two 64 GB Registered ECC DDR5 RDIMMs built for the GIGABYTE MZ73-LM2 motherboard. It delivers the exact rank, voltage and timing the board's memory controller expects so the full capacity is recognised at rated speed. Buyers needing unbuffered UDIMMs or a different pin count cannot use this kit.

Thermals, Noise and Power Draw

Operating at 1.10 V, the modules draw minimal power and run without a heat spreader in the server chassis airflow. Registered buffering reduces electrical load on the memory controller when every slot is populated. No active cooling is included, so adequate case ventilation is required for sustained workloads.

Build Quality and Daily Implications

Major-brand Samsung, Micron or Hynix ICs provide enterprise-grade stability with on-the-fly single-bit error correction. The 288-pin RDIMM form factor locks securely into the MZ73-LM2 slots following the board's population rules. Installers must verify the manual for supported capacities and slot order before seating the modules.

Highlights

  • 128 GB capacity from two 64 GB modules enables large workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput
  • Registered ECC design corrects errors and supports full population
  • 10 V operation matches the motherboard specification exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM2 board

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 288-pin DDR5 RDIMM modules in the GIGABYTE MZ73-LM2 and which population rule is commonly missed?

Power down, open the chassis, align each 288-pin DDR5 RDIMM with the keyed slot, press firmly until both latches click, then verify the motherboard manual for the exact DIMM sequence — many builders skip the prescribed order and the kit will not post at 128GB.

What maintenance or replacement will the 2Rx4 registered ECC kit need during its service life?

The modules have no heat spreader and no moving parts, so no scheduled maintenance is required; if a single-bit error exceeds ECC correction the DIMM must be replaced, and the lifetime replacement warranty covers that swap.

What limit appears first when the 6400 CL52 1.10V kit runs sustained workloads on the MZ73-LM2?

The memory controller's maximum supported DDR5 6400 speed is the first ceiling; all slots stay at rated frequency and voltage as long as the board's population rules are followed, so no thermal or voltage throttle occurs before that spec limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.