We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders, 288-pin, 384GB kit

NEMIX RAM

NEMIX RAM MR51200-9624K4 384GB 4x96GB DDR5 6400 CL52 ECC RDIMM memory upgrade

SKU CH-SSQ5-004CJ

A 384 GB DDR5-6400 ECC registered quad-kit using 2Rx4 1.1 V CL52 modules validated for the GIGABYTE MA34-CP0 motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Show 24 more configurations
  • 384 GB total capacity for large workloads from four 96 GB modules
  • DDR5 6400 speed with CL52 latency at 1.10 V for rated performance
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 288-pin RDIMM form factor matches the GIGABYTE MA34-CP0 motherboard requirements
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability

384 GB DDR5-6400 ECC RDIMM kit

This NEMIX RAM kit delivers 384 GB across four 96 GB DDR5-6400 registered DIMMs. Each module runs at 1.1 V with CL52 latency and a 2Rx4 organisation. The 288-pin RDIMM form factor and ECC registration match the requirements of the GIGABYTE MA34-CP0 motherboard.

Suited for the GIGABYTE MA34-CP0 platform

Builders populating all four slots on a GIGABYTE MA34-CP0 board with registered ECC memory will find the exact rank, voltage and timing the controller expects. Systems that require unbuffered UDIMMs, SODIMMs or non-ECC modules cannot use this kit.

Registered ECC stability for full-slot population

The registered architecture reduces electrical load on the memory controller, allowing all four slots to run at the rated 6400 MT/s. On-board ECC corrects single-bit errors in real time. Confirm the motherboard manual for approved population order and maximum supported capacity before installation.

Highlights

  • 384 GB total capacity for large workloads from four 96 GB modules
  • DDR5 6400 speed with CL52 latency at 1.10 V for rated performance
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 288-pin RDIMM form factor matches the GIGABYTE MA34-CP0 motherboard requirements
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Which motherboard must I already have for this 384GB DDR5 6400 kit to be recognised at full capacity?

The kit is verified for the GIGABYTE MA34-CP0 motherboard; its 288-pin RDIMM form factor and 1.10V operation match that board's memory-population rules exactly.

If I keep older DDR5 modules rated at a different speed, how will this CL52 6400MHz kit behave alongside them?

All installed DIMMs will run at the lowest common speed and latency; mixing ranks or timings can prevent the server from posting or force downclocking below 6400MHz.

After installing the four 96GB RDIMMs, what should I check in the BIOS to confirm the kit is running as intended?

Verify the memory info screen shows 384GB total, DDR5-6400 (PC5-51200), CL52, 1.10V, registered ECC mode, and all four slots populated in the order the MA34-CP0 manual specifies.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.