We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM THINKMATE DDR5 4800 ECC RDIMM 1TB (8x128GB) CL40 1.1V 288-Pin memory upgrade

SKU CH-S178-M2HH4

Eight 128 GB DDR5 ECC registered DIMMs running at 4800 MT/s with CL40 latency and 1.1 V operation for ThinkMate Supermicro SuperServer 511E-WR and 521E-WR systems

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 1TB server memory capacity from eight 128GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth for heavy workloads
  • ECC registered RDIMM design protects data integrity
  • 1V operation reduces power draw in dense configurations
  • Validated for ThinkMate SuperServer 511E-WR and 521E-WR platforms

Server-grade DDR5 ECC RDIMM kit

This NEMIX RAM kit delivers 1TB of DDR5 4800 registered ECC memory across eight 128GB modules. It is built for THINKMATE Supermicro SuperServer 511E-WR and 521E-WR platforms that require 288-pin DDR5 RDIMMs with 4Rx4 organisation and CL40 latency. The modules operate at 1.1V using major OEM DRAM from Samsung, Micron or Hynix.

Registered design for multi-DIMM stability

Registered buffering reduces electrical load on the memory controller, allowing all eight slots to be populated without signal degradation. ECC corrects single-bit errors to protect data integrity in mission-critical workloads. The kit requires a motherboard with DDR5 RDIMM slots and a CPU memory controller that supports 4800 MT/s registered modules at 1.1V.

Suited for high-capacity server upgrades

This kit suits administrators expanding 511E-WR or 521E-WR servers to the maximum supported DIMM count. It is not for desktop boards that accept only unbuffered UDIMMs, nor for systems limited to lower densities or slower DDR5 speeds. Buyers needing non-ECC memory or consumer form factors should look elsewhere.

Highlights

  • 1TB server memory capacity from eight 128GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth for heavy workloads
  • ECC registered RDIMM design protects data integrity
  • 1V operation reduces power draw in dense configurations
  • Validated for ThinkMate SuperServer 511E-WR and 521E-WR platforms

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K8
Capacity1TB (8 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the 1.1 V operating voltage limit headroom when the eight 128 GB modules run continuously at 4800 MT/s?

The kit is specified at 1.10 V for DDR5 4800 operation; sustained loads at that speed stay within the rated voltage without additional headroom.

How much heat do the eight registered 4Rx4 modules generate during all-day workloads without a heat spreader?

Eight 128 GB RDIMMs at 1.1 V produce measurable heat under continuous load; ensure the server chassis provides adequate airflow across the bare modules.

Which Thinkmate Supermicro SuperServer models must the buyer already own for this 288-pin kit to function?

This memory kit is validated for the Thinkmate Supermicro SuperServer 511E-WR and 521E-WR platforms.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.