We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare circuit boards with black chips, 288 pins each

NEMIX RAM

NEMIX RAM THINKMATE DDR5 4800 ECC RDIMM 256GB (2x128GB) CL40 1.1V 288-Pin 4Rx4 memory upgrade

SKU CH-J05X-F43FN

A 256 GB DDR5 ECC RDIMM kit running at 4800 MT/s with CL40 latency and 1.1 V operation for ThinkMate rackmount servers

  • Capacity256GB (2 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from two 128 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design protects data integrity in servers
  • Low 1.10 V operation reduces power draw per module
  • Validated for ThinkMate RAX-XS4-21S4 rackmount compatibility

ThinkMate DDR5 4800 ECC RDIMM 256GB Kit

This registered DDR5 memory kit provides 256GB across two 128GB modules for ThinkMate RAX-XS4-21S4 rackmount servers. It operates at 4800MHz with CL40 latency and 1.10V voltage. ECC and registered buffering protect data integrity in mission-critical workloads. The dual-rank 4Rx4 organisation uses major OEM Samsung, Micron or Hynix chips.

Suited for ThinkMate servers requiring registered

The kit fits administrators expanding capacity in the validated RAX-XS4-21S4 platform where registered DIMMs are mandatory. Builders needing unbuffered UDIMMs, non-ECC modules or speeds above 4800MHz should look elsewhere. Systems limited to lower densities than 128GB per slot cannot use these modules. Laptop, desktop or consumer motherboards are not supported.

Registered ECC with 4Rx4 organisation decides

The registered buffer and on-die ECC require a server chipset that explicitly supports RDIMM signalling. The 4Rx4 rank structure demands memory-controller support for quad-rank addressing. Without both features in the host firmware the modules will not initialise. Verify the ThinkMate service manual before purchase.

Highlights

  • 256 GB total capacity from two 128 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design protects data integrity in servers
  • Low 1.10 V operation reduces power draw per module
  • Validated for ThinkMate RAX-XS4-21S4 rackmount compatibility

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K2
Capacity256GB (2 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (2X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What is included in the box and is anything else needed to install it?

The kit contains two 128GB DDR5 4800 registered ECC RDIMM modules, giving 256GB total; no extra parts are required for installation in a compatible Thinkmate RAX-XS4-21S4 server.

Which capacity or rank option should I choose for this Thinkmate server?

This specific kit provides 256GB in a 2x128GB 4Rx4 configuration, matching the part number MR38400-744K2 for the Thinkmate RAX-XS4-21S4.

What does the DDR5 4800 CL40 1.1V rating mean once the memory is installed?

The modules operate at 4800 MT/s with CAS latency 40 at 1.1V, delivering registered ECC DDR5 performance for the qualified Thinkmate platform.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.