We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare circuit boards, 288 pins, no heat spreaders

NEMIX RAM

NEMIX RAM THINKMATE DDR5 4800 ECC RDIMM 256GB (2x128GB) CL40 1.1V memory upgrade

SKU CH-VP03-P4K4Z

A 256GB DDR5 4800 ECC registered dual-rank kit built for ThinkMate Supermicro SuperServer 611C-TN4R and 621C-TN12R platforms

  • Capacity256GB (2 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from two 128 GB modules
  • DDR5 4800 MT/s speed for high-throughput workloads
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw
  • Validated for ThinkMate Supermicro SuperServer 611C-TN4R and 621C-TN12R

256GB DDR5 4800 ECC RDIMM kit

This NEMIX RAM kit supplies 256GB across two 128GB DDR5 4800 registered DIMMs. It targets administrators expanding Thinkmate Supermicro SuperServer 611C-TN4R or 621C-TN12R platforms that require ECC registered memory.

Servers needing registered ECC at 4800 MT/s

The modules suit environments that mandate 4Rx4 organisation, 1.1V operation and CL40 timing on the qualified Thinkmate SuperServer models. Builders using consumer motherboards, unbuffered DIMM slots or slower DDR5 speeds should look elsewhere.

4Rx4 registered DDR5 organisation

Each 128GB module implements a 4Rx4 layout that the compatible SuperServer 611C-TN4R and 621C-TN12R memory controllers expect; mismatched rank configuration will prevent the system from posting.

Highlights

  • 256 GB total capacity from two 128 GB modules
  • DDR5 4800 MT/s speed for high-throughput workloads
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw
  • Validated for ThinkMate Supermicro SuperServer 611C-TN4R and 621C-TN12R

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K2
Capacity256GB (2 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (2X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How do I verify the 4800 MT/s speed and CL40 latency are active after installing the modules?

Enter the server BIOS or UEFI and confirm the memory frequency reads 4800 MT/s with timings showing CL40; the registered ECC design also lets the OS report corrected error counts if any occur.

What ships in the kit and are any extra parts required for installation?

The kit contains two 128 GB 288-pin DDR5 RDIMMs for a total of 256 GB; no additional cables, brackets or cooling accessories are needed — just seat the modules in the compatible ThinkMate Supermicro server slots.

Which capacity version should I choose for a ThinkMate SuperServer 611C-TN4R or 621C-TN12R?

This 256 GB kit (2 × 128 GB) is the listed configuration validated for those SuperServer models; select it when you need the full 256 GB registered ECC capacity at 1.1 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.