We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 RDIMM modules with gold contacts and black chips

NEMIX RAM

NEMIX RAM THINKMATE STX-TN-XE60-24S3 256GB (2x128GB) DDR4 3200 ECC RDIMM memory upgrade

SKU CH-QJ31-WD5HF

256 GB DDR4-3200 ECC registered dual-rank kit validated for Thinkmate STX-TN-XE60-24S3 servers

  • Capacity256GB (2 x 128GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 256 GB capacity lets servers handle larger datasets
  • DDR4 3200 speed transfers data at PC4-25600 bandwidth
  • ECC registered design detects and corrects memory errors
  • 2 V operation reduces power draw per module
  • Validated for Thinkmate STX-TN-XE60-24S3 NAS compatibility

System-Specific 256 GB DDR4 ECC Kit

This 256 GB kit contains two 128 GB DDR4 3200 registered ECC RDIMMs built for the ThinkMate STX-TN-XE60-24S3 NAS server. Each module runs at 1.2 V with CL22 latency and a 4Rx4 organisation. The registered design adds a buffer that reduces electrical load on the server memory controller.

Registered ECC modules for data integrity

Error-correcting code detects and corrects single-bit errors while the register buffers address and command signals. Together they protect stored data and allow the motherboard to populate more slots without signal degradation. The kit arrives as a matched pair so both DIMMs share identical timing and voltage characteristics.

288-pin RDIMM form factor for server boards

The 288-pin DDR4 RDIMM layout fits only motherboards wired for registered memory; it will not seat in standard unbuffered desktop slots. No heat spreader is fitted, so airflow across the bare PCB is required inside the chassis. Compatibility is validated for the named ThinkMate NAS platform.

Highlights

  • 256 GB capacity lets servers handle larger datasets
  • DDR4 3200 speed transfers data at PC4-25600 bandwidth
  • ECC registered design detects and corrects memory errors
  • 2 V operation reduces power draw per module
  • Validated for Thinkmate STX-TN-XE60-24S3 NAS compatibility

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-744K2
Capacity256GB (2 x 128GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank4Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (2X128GB) DDR4 3200MHZ PC4-25600 4Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 288-pin DDR4 RDIMM modules need a heat spreader added later?

No heat spreader is included on these modules; the server chassis airflow normally provides sufficient cooling for 1.2 V operation.

What limits sustained throughput on this 3200 MT/s registered kit?

The CL22 CAS latency and 4Rx4 organisation set the timing ceiling for continuous data transfers.

How much heat and power should I expect from the 256 GB kit running all day?

Each 128 GB module draws 1.20 V; total power scales with workload but stays within standard DDR4 RDIMM thermal limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.