We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square CPU fan, 10mm thick, 3-pin connector, 55mm pitch

OEM Industries

OEM Industries SMA06E05UF CPU cooler 60mm 5V .30A 3-pin pitch 55mm

SKU CH-TAZH-N5VGN

A 60 mm ball-bearing fan drawing 5 V at .30 A with a 3-pin connector and 55 mm mounting pitch for notebook CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 60 mm frame fits tight laptop bays
  • Ball bearing ensures durable, quiet operation
  • Low 5 V, 0.30 A draw saves battery life
  • Standard 3-pin connector enables simple motherboard hookup
  • 55 mm pitch-row spacing matches common notebook mounts

Compact 60 mm notebook cooler

The OEM Industries SMA06E05UF is a 60 mm square fan measuring 10 mm thick. It runs on 5 V DC at 0.30 A and connects through a three-pin header with a 55 mm pitch. The ball-bearing rotor and black frame are built for slim notebook chassis.

Suits tight laptop refreshes

Technicians repairing or upgrading a notebook that uses a 5 V three-pin fan with this exact mounting pitch will find a direct fit. Systems that require a larger frame, a different voltage or a four-wire PWM connector cannot use this cooler.

5 V three-pin power requirement

The cooler draws 0.30 A from a 5 V rail through its three-pin connector. If the target board supplies only a higher voltage or a different header layout the fan will not operate.

Highlights

  • Compact 60 mm frame fits tight laptop bays
  • Ball bearing ensures durable, quiet operation
  • Low 5 V, 0.30 A draw saves battery life
  • Standard 3-pin connector enables simple motherboard hookup
  • 55 mm pitch-row spacing matches common notebook mounts

Specifications

ModelSMA06E05UF
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Questions about this item

Will the 55 mm pitch-row holes match my laptop's existing mounting points?

The cooler uses a 55 mm pitch-row spacing between its two mounting holes; measure your board's hole centres to confirm they match this exact distance.

How do I connect the 3-pin lead to a 5 V header without reversing polarity?

Align the keyed 3-pin connector with the motherboard's 5 V fan header — the plastic tab prevents backward insertion — then press firmly until seated.

When should I replace the ball-bearing fan in this 60 mm cooler?

Replace the fan when bearing noise becomes audible or RPM drops noticeably below the rated .30 A current draw at 5 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.