OWC 3L2D44R4128G 128GB DDR4 3200MHz CL22 4Rx4 ECC LRDIMM 1.2V 288-pin server RAM
- 128GB
- 288-Pin DDR4 ECC LR…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
128 GB DDR4 ECC registered RDIMM kit (2×64 GB, 3200 MT/s, CL22, 1.2 V) for HP ProLiant DL110 Gen10 Plus Telco and DL325 Gen10 Plus
Capacity 128GB (2 x 64GB)
This OWC memory kit provides 128GB of DDR4 3200 ECC Registered RDIMM capacity across two 64GB modules. It operates at 1.2V with CL22 latency and a 2Rx4 rank configuration. The 288-pin modules are designed specifically for compatible HP ProLiant server platforms requiring registered ECC memory.
This upgrade suits administrators expanding memory in the listed HP ProLiant servers using HP part numbers P43170-B21, P06035-B21, P07650-B21, or P25205-B21. It is not for standard desktop computers or workstations requiring unbuffered non-ECC memory. Builders needing load-reduced ECC DIMMs or different form factors should look elsewhere.
The decisive specification is the registered ECC DDR4 3200 interface with CL22 timing at 1.2V. Your system must support 288-pin RDIMM modules with 2Rx4 organisation and registered buffering. Mixing with unbuffered or load-reduced memory is not supported and will prevent operation.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R4128P |
| Capacity | 128GB (2 x 64GB) |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant DL110 Gen10 Plus Telco HP ProLiant DL325 Gen10 Plus |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the 288-pin DDR4 RDIMMs match the slot type used in the compatible HP ProLiant DL110 Gen10 Plus Telco and DL325 Gen10 Plus systems.
Install the first module in the slot designated for channel 0 and the second in the corresponding channel 1 slot as shown in the server's memory population guide.
Registered ECC modules do not require periodic reseating; they are designed for continuous operation and only need attention if the system reports a correctable error threshold.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?