We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 ECC RDIMM sticks side by side

OWC

OWC 16GB (2x8GB) DDR3 1333 ECC RDIMM memory upgrade

SKU CH-YWB7-DNV1G

A 16 GB DDR3 ECC registered DIMM kit for HP ProLiant DL160 G6, DL165 G7, DL170e G6, DL170h G6 and DL180 G6 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design prevents data errors in server workloads
  • 16 GB kit (2 × 8 GB) expands memory capacity for virtualisation
  • DDR3 1333 CL9 matches HP ProLiant G6/G7 specifications
  • 5 V JEDEC voltage ensures stable operation without tuning
  • Direct replacement for HP part numbers 500205071 500205171 500206071 500662B21 501536001 593913B21

Server ECC RDIMM kit

This 16 GB kit contains two 8 GB DDR3 1333 PC3-10600 CL9 registered ECC modules built for HP ProLiant DL160 G6, DL165 G7, DL170e G6, DL170h G6 and DL180 G6 servers. It replaces HP part numbers 500205071, 500205171, 500206071, 500662B21, 501536001, 593913B21, A0R56A, AM231A, AM328A, FX622AA and FX622UT. The modules run at 1.5 V with a 2Rx4 organisation.

Registered ECC difference

Registered ECC memory adds a register between the DRAM and the memory controller and includes error-correcting code, so it cannot be mixed with unbuffered non-ECC DIMMs. The kit is validated for the listed ProLiant models and is not compatible with standard desktop platforms.

Pre-installation check

Verify that your server is one of the supported ProLiant models and that all installed DIMMs are registered ECC of the same speed and voltage. Confirm the motherboard has free 240-pin DDR3 slots and that the BIOS is current before adding this kit.

Highlights

  • ECC registered design prevents data errors in server workloads
  • 16 GB kit (2 × 8 GB) expands memory capacity for virtualisation
  • DDR3 1333 CL9 matches HP ProLiant G6/G7 specifications
  • 5 V JEDEC voltage ensures stable operation without tuning
  • Direct replacement for HP part numbers 500205071 500205171 500206071 500662B21 501536001 593913B21

Specifications

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant DL160 G6
HP ProLiant DL165 G7
HP ProLiant DL170e G6
HP ProLiant DL170h G6
HP ProLiant DL180 G6

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2Rx4 registered DIMMs need any firmware updates or matching modules when I add more memory later?

OWC recommends using identical capacity, speed and manufacturer for all DIMMs; the kit supplies two 8 GB 2Rx4 registered modules at DDR3 1333 CL9 1.5 V.

What thermal limit appears first when the 1.5 V registered DIMMs run continuously in a ProLiant DL180 G6?

The modules have no heat spreader, so case airflow becomes the primary cooling path; sustained load will hit the DIMM temperature rating before any voltage throttle.

How much power and noise do the two 8 GB DDR3 1333 registered sticks add to a DL165 G7 running 24/7?

Each stick draws 1.5 V at standard DDR3 1333 current; with no onboard fans the kit adds only the modules' own heat to the server's existing airflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.