We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OWC

OWC 16GB DDR3 1333 ECC Registered RDIMM 2Rx4 HP ProLiant DL160 G6 DL165 G7 DL170e G6 DL170h G6 DL180 G6

SKU CH-TBMP-7Y96D
  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • 16 GB DDR3 1333 ECC Registered RDIMM for HP ProLiant servers
  • CL9 latency at 1.5 V keeps data flow steady under load
  • 2Rx4 dual-rank layout maximises capacity per 240-pin slot
  • JEDEC & RoHS compliant module tested to exceed OEM specifications
  • Single 16 GB stick simplifies upgrades in DL160 G6, DL165 G7, DL170e G6, DL170h G6, DL180 G6

16GB DDR3 ECC RDIMM for HP ProLiant servers

This 16GB DDR3 1333 ECC Registered RDIMM is designed for HP ProLiant DL160 G6, DL165 G7, DL170e G6, DL170h G6 and DL180 G6 servers. It operates at PC3-10600 speed with CL9 latency and 1.5V voltage. The module uses a 2Rx4 rank configuration on a 240-pin form factor without a heat spreader. It targets administrators extending the service life of these specific rackmount platforms.

Upgrade from lower-capacity DDR3 RDIMMs

Replacing smaller registered DIMMs with this 16GB module increases total memory capacity while maintaining ECC error correction and registered signalling required by the listed ProLiant models. The jump is worthwhile when workloads such as virtualisation or database caching exceed the current memory ceiling. Mixing with unbuffered memory is not supported, so all slots must use registered modules of matching specification.

Verify registered DIMM slots and population rules

Before ordering, confirm the server has available 240-pin DDR3 slots that accept registered ECC memory and check the system documentation for maximum supported capacity per slot and per channel. Ensure existing installed modules are also registered ECC types; mixing registered with unbuffered memory will prevent boot. The platform must support 2Rx4 organisation at 1333 MT/s.

Highlights

  • 16 GB DDR3 1333 ECC Registered RDIMM for HP ProLiant servers
  • CL9 latency at 1.5 V keeps data flow steady under load
  • 2Rx4 dual-rank layout maximises capacity per 240-pin slot
  • JEDEC & RoHS compliant module tested to exceed OEM specifications
  • Single 16 GB stick simplifies upgrades in DL160 G6, DL165 G7, DL170e G6, DL170h G6, DL180 G6

Specifications

BrandOWC
Part Number1R3D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant DL160 G6
HP ProLiant DL165 G7
HP ProLiant DL170e G6
HP ProLiant DL170h G6
HP ProLiant DL180 G6

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 240-pin DDR3 RDIMM fit the memory slots on an HP ProLiant DL180 G6?

Yes, the 240-pin DDR3 1333 registered ECC module is listed as compatible with the DL180 G6 and the other named ProLiant models.

What is the correct way to install this 2Rx4 registered DIMM, and what mistake should I avoid?

Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, and press firmly until the latches click; do not mix this registered ECC DIMM with unbuffered memory.

When should I expect to replace this 16GB DDR3 1333 module in a production server?

DDR3 registered ECC memory has no scheduled replacement interval; replace a module only if diagnostics report correctable or uncorrectable errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.