We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

OWC

OWC 16GB DDR4 2400 CL17 2Rx8 288-pin 1.2V Non-ECC UDIMM memory upgrade

SKU CH-7FKD-NZMQX

A 16 GB DDR4 2400 CL17 UDIMM module tested for QNAP TS-1273U-RP, TS-1277, TS-1635AX, TS-1673U and TS-1673U-RP systems

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 16 GB DDR4 2400 CL17 boosts NAS responsiveness
  • 288-pin 1.2 V UDIMM fits listed QNAP models
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Backward compatible with 2133 MHz systems
  • Replaces QNAP RAM-16GDR4A0-UD-2400 and RAM-16GDR4A1-UD-2400

16GB DDR4 UDIMM for QNAP NAS

This 16GB DDR4 2400 CL17 module is built as a single 288-pin non-ECC unbuffered DIMM rated at 1.2V. It replaces QNAP part numbers RAM-16GDR4A0-UD-2400 and RAM-16GDR4A1-UD-2400 and is validated for the TS-1273U-RP, TS-1277, TS-1635AX, TS-1673U and TS-1673U-RP.

Check your NAS model and slot count

Confirm that your unit is one of the five QNAP models listed above before ordering. The module uses the standard 288-pin DDR4 UDIMM form factor and runs at 2400MHz with backward compatibility to 2133MHz. Systems requiring ECC or registered memory cannot use this stick.

Thermals noise and power in normal use

Operating at the JEDEC standard 1.2V, the module draws minimal power and runs without a heat spreader. Passive cooling inside the NAS chassis is sufficient for typical workloads. The stick adds no audible noise and keeps thermal contribution low in multi-bay configurations.

Highlights

  • 16 GB DDR4 2400 CL17 boosts NAS responsiveness
  • 288-pin 1.2 V UDIMM fits listed QNAP models
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Backward compatible with 2133 MHz systems
  • Replaces QNAP RAM-16GDR4A0-UD-2400 and RAM-16GDR4A1-UD-2400

Specifications

BrandOWC
Part Number2U4D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-1273U-RP
QNAP TS-1277
QNAP TS-1635AX
QNAP TS-1673U
QNAP TS-1673U-RP

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the box contain only the single 16GB DDR4 2400 CL17 2Rx8 UDIMM or are extra parts included?

The package contains one 16GB DDR4 2400 PC4-19200 CL17 2Rx8 288-pin 1.2V Non-ECC UDIMM module. No additional cables, brackets or heat spreaders are supplied.

Should I pick the 16GB 2400 CL17 2Rx8 version or a different capacity for my QNAP TS-1673U?

This module is a 16GB 2400 CL17 2Rx8 UDIMM that replaces QNAP part numbers RAM-16GDR4A0-UD-2400 and RAM-16GDR4A1-UD-2400. Choose it when your TS-1673U needs a single 16GB stick at that speed and rank.

Will the PC4-19200 2400MHz rating actually run at 2400MHz in a TS-1277 or drop to 2133MHz?

The module is rated PC4-19200 2400MHz CL17 and is backward compatible with 2133MHz. In a TS-1277 it will operate at the highest speed the system supports, up to 2400MHz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.