We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge contacts and black memory chips

OWC

OWC 2GB DDR3 1066 PC3-8500 CL7 1Rx8 204-pin 1.5V SODIMM memory upgrade

SKU CH-YNCA-W282C

Adds 2 GB of DDR3 1066 memory to compatible Dell Latitude laptops for faster multitasking

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • Boosts responsiveness with 2GB DDR3 1066 CL7 module
  • JEDEC and ROHS compliant for warranty-safe upgrade
  • Unbuffered non-ECC design installs easily in supported laptops
  • 5V operation matches factory power requirements
  • Validated for Dell Latitude E6410, ATG, XT2 and XT2 XFR

Targeted upgrade for specific Dell laptops

This OWC module adds 2 GB of DDR3 memory to compatible Dell Latitude models including the E6410, E6410 ATG, XT2 and XT2 XFR. It is a non-ECC, unbuffered SODIMM rated at 1066 MHz with CL7 latency. The single 1Rx8 rank design fits the 204-pin slot and operates at 1.5 V. It is built to JEDEC and RoHS standards for a warranty-safe installation.

Fits into a single SODIMM slot on supported systems

The module requires a free 204-pin DDR3 slot in one of the listed Latitude notebooks. Because it is unbuffered and non-ECC it works with the standard memory controller in those machines without extra configuration. Adding this stick frees up the remaining slot for a matching module if the chassis supports two. No heat spreader is included so clearance inside tight laptop bays is not an issue.

Replaces or supplements the original factory memory

Systems shipped with 1 GB or 2 GB of slower DDR3 will see improved multitasking and responsiveness after this upgrade. The jump is worth it when the current amount of memory limits the number of open applications or causes frequent paging. It is not for machines that already run the maximum supported capacity or that require ECC or registered modules.

Highlights

  • Boosts responsiveness with 2GB DDR3 1066 CL7 module
  • JEDEC and ROHS compliant for warranty-safe upgrade
  • Unbuffered non-ECC design installs easily in supported laptops
  • 5V operation matches factory power requirements
  • Validated for Dell Latitude E6410, ATG, XT2 and XT2 XFR

Specifications

BrandOWC
Part Number8S5D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell Latitude E6410
Dell Latitude E6410 ATG
Dell Latitude XT2
Dell Latitude XT2 XFR

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What is the CAS latency of this DDR3 1066 module?

The module runs at CL7 latency, which is the standard timing for PC3-8500 DDR3 SODIMMs at 1066 MHz.

How much power does this 1.5 V SODIMM draw during continuous operation?

Operating at 1.5 V without a heat spreader, it draws minimal power typical for a 2 GB unbuffered DDR3 module in a laptop slot.

Which Dell Latitude models must I already own for this 204-pin upgrade to fit?

It is validated for Latitude E6410, E6410 ATG, XT2 and XT2 XFR systems that accept 204-pin DDR3 SODIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.