We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OWC

OWC 32GB (2x16GB) DDR4 2933 PC4-23400 CL21 1Rx4 288-pin 1.2V ECC Registered RDIMM memory upgrade

SKU CH-337T-KM60M

Two 16 GB DDR4 2933 ECC registered DIMMs for Cisco UCS B200 M5, B480 M5, C220 M5, C240 M5 and C480 M5 servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes
  • ECC registered design protects data integrity in critical workloads
  • 32 GB kit (2 x 16 GB) doubles capacity for virtualisation and databases
  • DDR4 2933 MHz CL21 delivers high throughput at 1.2 V
  • Validated for Cisco UCS B200 M5, B480 M5, C220 M5, C240 M5, C480 M5
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Compatible Cisco UCS servers

This 32 GB kit contains two 16 GB DDR4 2933 ECC registered DIMMs built for Cisco UCS B200 M5, B480 M5, C220 M5, C240 M5 and C480 M5 systems. It replaces Cisco part numbers HXMRX16G1RTH and UCSMRX16G1RTH. Standard desktop motherboards cannot use registered ECC modules, so this kit is not for consumer PCs.

Thermals and power

Each module runs at 1.2 V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering adds minimal electrical load, and the CL21 latency at 2933 MT/s keeps power draw low during typical workloads. Backward compatibility with 2133, 2400 and 2666 MT/s lets the kit run cooler in slower configurations.

What the kit changes

Installing matched 1Rx4 pairs enables dual-channel operation and full ECC error correction for data integrity. The registered design prevents signal loading on the memory bus when populating multiple slots. JEDEC and RoHS compliance ensures the upgrade is warranty-safe for supported Cisco platforms.

Highlights

  • ECC registered design protects data integrity in critical workloads
  • 32 GB kit (2 x 16 GB) doubles capacity for virtualisation and databases
  • DDR4 2933 MHz CL21 delivers high throughput at 1.2 V
  • Validated for Cisco UCS B200 M5, B480 M5, C220 M5, C240 M5, C480 M5
  • Backward compatible with 2133, 2400 and 2666 MHz systems

Specifications

BrandOWC
Part Number2R9D41R4032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B200 M5
Cisco UCS B480 M5
Cisco UCS C220 M5
Cisco UCS C240 M5
Cisco UCS C480 M5

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 288-pin ECC Registered DIMMs in a Cisco UCS C220 M5 without mixing them with unbuffered modules?

Power down the server, open the chassis, locate the DDR4 slots, and insert each 16 GB module firmly until the retention clips click; the registered design and 1.2 V operation mean they must not share a channel with unbuffered or load-reduced DIMMs.

What maintenance or replacement will the 1Rx4 registered modules need over their service life?

No routine maintenance is required; the modules carry a limited lifetime warranty with advanced replacement, so a failed stick is swapped rather than repaired.

At what point does the CL21 latency at 2933 MT/s become the limiting factor during sustained workloads?

The CAS 21 timing at 2933 MT/s sets the baseline access latency; under continuous heavy traffic the memory controller waits for each column strobe, making latency the first bottleneck before bandwidth saturates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.