We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with gold edge connectors and black memory chips

OWC

OWC 32GB DDR5 4800 CL40 ECC Registered RDIMM 2Rx8 Dell PowerEdge R6625 R760 R7615 R7625

SKU CH-BEER-9H4VY

32 GB DDR5 4800 CL40 ECC registered RDIMM for Dell PowerEdge R6625, R760, R7615 and R7625 servers

  • Capacity32GB
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes

Capacity 32GB

  • ECC registered design protects data integrity in Dell PowerEdge servers
  • 32 GB DDR5 4800 CL40 module expands memory capacity
  • 1 V low-voltage operation reduces power draw
  • 2Rx8 dual-rank layout optimises bandwidth for registered DIMM slots
  • Validated for PowerEdge R6625 R760 R7615 R7625 compatibility

System-specific DDR5 ECC RDIMM

This 32GB DDR5 4800 CL40 registered module is built for Dell PowerEdge R6625, R760, R7615 and R7625 servers. It delivers error-correcting, registered memory for workloads that require data integrity and platform-specific qualification. The single DIMM occupies one 288-pin slot and runs at 1.1V.

Registered design with 2Rx8 organisation

The module uses a registered buffer and 2Rx8 rank structure, which the target platforms expect for stable operation at 4800 MT/s. No heat spreader is fitted, so airflow in the server chassis handles cooling directly. Mixing with unbuffered or load-reduced DIMMs is not supported by the memory controller.

Replaces Dell AC239378 SNPW08W9C/32G

This part number matches the OEM specification for a direct memory upgrade or replacement in the listed PowerEdge models. The jump is worthwhile when expanding capacity beyond the factory configuration or when a failed DIMM must be swapped with a qualified equivalent. Builders needing unbuffered memory or consumer platforms cannot use this module.

Highlights

  • ECC registered design protects data integrity in Dell PowerEdge servers
  • 32 GB DDR5 4800 CL40 module expands memory capacity
  • 1 V low-voltage operation reduces power draw
  • 2Rx8 dual-rank layout optimises bandwidth for registered DIMM slots
  • Validated for PowerEdge R6625 R760 R7615 R7625 compatibility

Specifications

BrandOWC
Part Number4R8D52R832GB
Capacity32GB
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell PowerEdge R6625
Dell PowerEdge R760
Dell PowerEdge R7615
Dell PowerEdge R7625

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the DDR5 4800 PC5-38400 interface cap at 4800 MT/s in these servers?

Yes, the module runs at DDR5 4800 (PC5-38400) with CL40 latency, which is the rated speed for the supported PowerEdge platforms.

What physical slot does the 288-pin RDIMM need in the R6625 R760 R7615 R7625?

It requires a standard 288-pin DDR5 DIMM slot; the registered 2Rx8 design fits the server memory channels used by these models.

How is the module installed and what step is often missed?

Power down the server, open the chassis, align the notch on the 288-pin edge connector, press firmly until the retention clips lock, then verify in BIOS that ECC registered mode is active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.