OWC 512GB (4x128GB) DDR4 3200 CL22 ECC LRDIMM memory upgrade
- 512GB (4 x 128GB)
- 288-Pin DDR4 ECC LR…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
512GB kit of four 128GB DDR4 2933 ECC load-reduced DIMMs for Dell PowerEdge R840 and R940xa servers
Capacity 512GB (4 x 128GB)
Struck-through versions exist but are not stocked here.
This OWC kit delivers 512GB of DDR4 2933 ECC Load-Reduced memory across four 128GB modules. It is built for Dell PowerEdge R840 and R940xa servers that require registered ECC LRDIMM technology. The modules operate at 1.2V with CL21 latency and a 4Rx4 rank structure. This memory will not work in standard desktops or systems that use unbuffered or registered ECC DIMMs.
The 288-pin LRDIMMs install like any server DIMM: power down, open the chassis, align the key notch, and press until the ejectors latch. The critical rule is that Load-Reduced modules cannot be mixed with unbuffered or registered ECC DIMMs in the same system. Population order follows the Dell service manual for the R840 and R940xa; deviating from that order will prevent the server from posting.
Confirm the chassis is a Dell PowerEdge R840 or R940xa, as this kit is validated only for those platforms. Check that existing DIMMs are also DDR4 ECC Load-Reduced; mixing with other ECC types is not supported. The modules are backward compatible with 2133, 2400 and 2666MHz bus speeds, so they will clock down if the CPU or firmware dictates a lower rate. Ensure enough free DIMM slots exist for the four-module kit.
| Brand | OWC |
|---|---|
| Part Number | 2L9D44R4512S |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Dell PowerEdge R840 Dell PowerEdge R940xa |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Enter the server BIOS or use a tool like CPU-Z to confirm the memory reports DDR4-2933, CAS latency 21, 1.2V and ECC Load Reduced operation across all four 128GB modules.
The box holds four 128GB DDR4 2933 PC4-23400 CL21 4Rx4 288-pin 1.2V ECC Load Reduced LRDIMMs; no extra cables, brackets or software are needed for Dell PowerEdge R840 or R940xa.
This kit delivers the full 512GB using four 128GB Load Reduced modules optimised for R840 and R940xa, running at 2933MHz with backward compatibility to 2133, 2400 and 2666MHz.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?