We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OWC

OWC 64GB DDR4 3200 ECC Registered RDIMM 2Rx4 CL22 1.2V 288-pin memory upgrade 3R2D42R464GB

SKU CH-CFZ7-0QQFZ

64GB DDR4 3200 ECC registered RDIMM for Gigabyte MP72-HB0, MU72-SU0, MU92-TU1, MZ01-CE0 and MZ01-CE1 servers

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS Latency22
  • Voltage1.2V
  • ECCYes

Capacity 64GB

Struck-through versions exist but are not stocked here.

  • ECC registered design protects data integrity in servers
  • 64 GB capacity in a single 288-pin module
  • DDR4 3200 speed with CL22 latency at 1.2 V
  • 2Rx4 rank organisation for high-density workloads
  • Qualified for Gigabyte MP72-HB0, MU72-SU0, MU92-TU1, MZ01-CE0 and MZ01-CE1

64GB DDR4 ECC Registered RDIMM

This 64GB DDR4 3200 ECC Registered RDIMM is built for servers and workstations that require error-correcting registered memory. It fits Gigabyte MP72-HB0, MU72-SU0, MU92-TU1, MZ01-CE0 and MZ01-CE1 systems. Standard desktop computers cannot use this module type.

Replaces slower DDR4 or adds capacity

The module runs at 3200MHz with CL22 latency and 1.2V voltage. It is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz DDR4 slots. The upgrade is worth it when your workload needs ECC integrity and the registered signal buffering this 2Rx4 design provides.

Verify registered ECC support and slot count

Confirm your system specifically supports DDR4 ECC Registered RDIMMs and cannot mix them with unbuffered or load-reduced DIMMs. Check available 288-pin slots and maximum per-slot capacity before ordering. This single 64GB stick requires a compatible registered memory controller.

Highlights

  • ECC registered design protects data integrity in servers
  • 64 GB capacity in a single 288-pin module
  • DDR4 3200 speed with CL22 latency at 1.2 V
  • 2Rx4 rank organisation for high-density workloads
  • Qualified for Gigabyte MP72-HB0, MU72-SU0, MU92-TU1, MZ01-CE0 and MZ01-CE1

Specifications

BrandOWC
Part Number3R2D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS Latency22
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemGigabyte MP72-HB0
Gigabyte MU72-SU0
Gigabyte MU92-TU1
Gigabyte MZ01-CE0
Gigabyte MZ01-CE1

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 288-pin DDR4 RDIMM fit the DIMM slots on a Gigabyte MP72-HB0?

Yes, the module is a 288-pin DDR4 ECC Registered DIMM validated for the MP72-HB0, MU72-SU0, MU92-TU1, MZ01-CE0 and MZ01-CE1 platforms.

What is the correct installation sequence for this 2Rx4 registered module?

Power off the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips lock, then populate additional slots per the platform's population guide.

When should the 64 GB DDR4 3200 module be replaced?

Replace the module if the system firmware reports uncorrectable ECC errors or if a larger capacity is required for the workload.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.