We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with black memory chips and gold contacts

OWC

OWC 8GB DDR4 3200MHz CL22 1.2V 288pin UDIMM HP ProDesk 480 G7 600 G6

SKU CH-5YEF-1090N

8 GB DDR4 3200 MHz CL22 UDIMM for HP ProDesk 480 G7 and 600 G6 systems

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • 8GB capacity adds multitasking headroom for everyday workloads
  • DDR4 3200MHz CL22 speed matches system memory bus
  • 2V low voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits HP ProDesk 480 G7 and 600 G6
  • JEDEC compliant and ROHS certified for warranty-safe upgrade

HP ProDesk upgrade

This 8 GB DDR4 module is built for HP ProDesk 480 G7 Tower, 600 G6 SFF and 600 G6 Tower systems. It brings a straightforward capacity increase for office workloads and general multitasking. The non-ECC unbuffered design matches the standard desktop DIMM slots in these machines.

Sustained operation

Running at 3200 MHz with CL22 timing and 1.2 V, the stick follows JEDEC specifications for stable continuous use. Backward compatibility with 2133, 2400, 2666 and 2933 MHz platforms allows it to downclock automatically when the system requires a lower speed. No heat spreader is fitted, so airflow in the chassis handles thermal management.

Installation notes

The 288-pin UDIMM fits directly into the available DIMM slots on the listed ProDesk models. Because it is a single-rank 1Rx8 module, it works in single-channel or dual-channel configurations depending on slot population. Builders needing ECC error correction or registered buffering should choose a different module, as this unit provides neither.

Highlights

  • 8GB capacity adds multitasking headroom for everyday workloads
  • DDR4 3200MHz CL22 speed matches system memory bus
  • 2V low voltage reduces power draw and heat
  • 288-pin UDIMM form factor fits HP ProDesk 480 G7 and 600 G6
  • JEDEC compliant and ROHS certified for warranty-safe upgrade

Specifications

BrandOWC
Part Number3U2D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 480 G7 Tower
HP ProDesk 600 G6 SFF
HP ProDesk 600 G6 Tower

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 1.2V DDR4 module run hot or draw much power during continuous all-day use?

The module operates at the standard JEDEC 1.2V DDR4 voltage with no heat spreader, so it runs at normal desktop memory temperatures and power draw.

What must the HP ProDesk already have — such as free 288-pin slots and a supported BIOS — for this 8GB UDIMM to work?

You need an available 288-pin DDR4 UDIMM slot in an HP ProDesk 480 G7 Tower, 600 G6 SFF or 600 G6 Tower; the system will auto-negotiate speed at 3200MHz CL22.

If I keep existing 2133MHz or 2400MHz DDR4 sticks, will this 3200MHz CL22 module down-clock and run stably alongside them?

Yes — the module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz DDR4, so it will match the speed of your slowest installed stick.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.