SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
RIITOP
Adds six SATA 3.0 ports at 6.0 Gbps via a PCIe x4 slot, includes cables and a low-profile bracket
The RIITOP PCES36P+CB adds six SATA 3.0 ports through a single PCIe x4 slot. It is aimed at builders who need more internal drive connections for storage arrays or backup drives. The card uses the ASMedia ASM1166 chipset and provides AHCI support without RAID functionality.
Six SATA 3.0 cables ship in the box so every port can be populated immediately. A low-profile bracket is also supplied, allowing the card to fit in slim or half-height chassis where a full-height bracket would not clear the case.
Installation needs a free PCIe x4 or larger slot; the card will not work in an x1 slot. The controller cannot boot an operating system drive, so it is only suitable for additional data drives. Drivers are native to modern operating systems, and the single-chip design avoids extra configuration steps.
| Brand | RIITOP |
|---|---|
| Model | PCES36P+CB (RIITOP SATA 3.0 PCIe Express SATA Controller Expression Card 6Gbps, Come with 6pcs SATA 3.0 Cables, ASM 1166 Chipset, Support NCQ) |
| Type | PCI Express Controller Card |
| External USB Ports | No |
| Internal Ports | 6x SATA 3.0 |
| Standard | PCI-e Express to SATA 3.0 Expansion Card Adapter |
| Data Transfer Rate | 6.0 Gbps |
| Compatibility | PCI Express x4 (or above) Slot |
| Specifications | Chipset: For ASMedia ASM1166. Interface: PCI Express 4x. Port Number: 6 Port SATA 3.0. Dimension: 80*22 mm. |
| Features | 6 AHCI SATA III (6 Gbps) ports through PCI Express x4. Fully compliant with SATA 3.0 specifications and backward compatible with SATA I/II (1.5/3.0Gbps). Compliant with PCI Express 3.0 standards. Port Multiplier Command-based switching supported. For Natively supported single chipset design. Support For Native Command Queuing (NCQ). Support For SSC for both PCIe and SATA. Includes Low Profile/Half-Height installation bracket. |
| Dimensions | 80*22mm. |
| Weight | 145g / 0.32 lb. |
| Package Contents | 1x 6 Ports SATA 3.0 PCI-e x4 Expansion Card. |
The ASM1166 uses native AHCI support in Windows and Linux so no separate driver is required and firmware updates are not typically issued for this controller.
The PCI Express 3.0 x4 host link caps aggregate bandwidth at roughly 4 GB/s so the bus saturates before the individual 6.0 Gbps ports do.
The single ASM1166 chip runs passively with no onboard fan and the low-profile bracket fits tight airflow paths without adding audible noise.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?