Seagate BarraCuda Q5 ZP1000CV3A001 1TB M.2 2280 PCIe Gen3 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Seagate
A 500 GB M.2 2280 internal SSD using PCIe Gen3 x4 NVMe 1.3 with 3D QLC NAND delivering up to 2300 MB/s sequential read and 900 MB/s write
The Seagate BarraCuda Q5 ZP500CV3A001 is a 500GB internal SSD built for consumer PCs and laptops. It uses 3D QLC NAND and a PCIe Gen3 x4 NVMe 1.3 interface to deliver solid-state speed in a compact M.2 2280 form factor. The drive targets users who want faster boot and load times without the cost of higher-end flash.
Installation requires an M.2 2280 key-M slot wired for PCIe NVMe; the drive is 2.15mm thick and 22.00mm wide. Its low 23mW idle draw and 2.2W active power help preserve laptop battery life. The slim profile leaves room for other components and simplifies upgrades in space-constrained chassis.
Sequential reads reach up to 2300 MBps and writes up to 900 MBps during prolonged transfers. The controller manages 3D QLC write amplification to keep performance consistent rather than peaking only in short bursts. A 1.8 million-hour MTBF and 119TB total bytes written rating back long-term reliability at operating temperatures from 0°C to 70°C.
| Brand | Seagate |
|---|---|
| Series | BarraCuda Q5 |
| Model | ZP500CV3A001 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D QLC |
| Interface | PCIe Gen3 x4 NVMe 1.3 |
| Max Sequential Read | Up to 2300 MBps |
| Max Sequential Write | Up to 900 MBps |
| MTBF | 1,800,000 hours |
| Features | Upgrade to cost-effective SSD speeds with next-gen 3D QLC NAND Leverage NVMe SSD speeds that are up to 50x faster than traditional hard drives Harness high sequential read/write speeds (up to 2300/900 MB/s) for more responsive downloads, installs, and multitasking Get easy installation and upgrades with a slim M.2 2280 NVMe form factor Extend battery life with low active power requirements of up to 2.2W Rely on 1.8M-hours MTBF Enjoy added peace of mind with 1-year Rescue Data Recovery Services Benefit from long-term durability with 119TB total bytes written (TBW) Migrate and clone da |
| Power Consumption (Idle) | 23 mW |
| Power Consumption (Active) | 2.2W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 2.15mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| Shipping weight | 0.05 kg |
| Package size | 178 × 133 × 13 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The drive maintains up to 900 MBps sequential write until the SLC cache fills, after which the 3D QLC NAND settles to its native programme speed; the rated 119 TBW reflects this behaviour.
Active power is 2.2 W and idle power 23 mW; the controller is rated for continuous operation between 0 °C and 70 °C.
A PCIe Gen3 x4 M.2 key-M slot with NVMe 1.3 support is needed; the drive is 22 mm wide and 2.15 mm thick.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?