We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SAS hard drive with green circuit board visible on underside

Seagate

Seagate ST300MM0006 300GB 10000RPM 6Gbps 64MB 2.5" SAS internal hard drive

SKU CH-NGB9-X41E2

300 GB 2.5-inch SAS drive spins at 10000 RPM with 64 MB cache for fast server storage

  • 300 GB capacity stores enterprise datasets
  • 10 000 RPM spindle accelerates transaction processing
  • 6 Gb/s SAS interface connects to RAID controllers
  • 64 MB cache buffers burst I/O workloads
  • 5 inch form factor fits dense server bays

Seagate 300 GB 10K SAS Drive

The Seagate SAVVIO 10K.6 ST300MM0006 is a new 2.5-inch internal hard drive with a 300 GB capacity, 10000 RPM spindle speed and a 6 Gb/s SAS interface. A 64 MB buffer and 512n sector format complete the specification for enterprise storage arrays and servers.

Suits high-IOPS enterprise workloads

This drive fits 2.5-inch SAS bays in rackmount servers and storage enclosures that require 10K rotational speed and a 6 Gb/s link. Buyers who need more capacity per drive or a different physical form factor should evaluate other models.

6 Gb/s SAS interface decides fit

The single specification that determines compatibility is the 6 Gb/s SAS interface; the host backplane or controller must support this exact link speed and protocol for the drive to operate.

Highlights

  • 300 GB capacity stores enterprise datasets
  • 10 000 RPM spindle accelerates transaction processing
  • 6 Gb/s SAS interface connects to RAID controllers
  • 64 MB cache buffers burst I/O workloads
  • 5 inch form factor fits dense server bays

Specifications

No published specifications for this item yet.

Questions about this item

Does my server backplane need a 2.5" SAS 6Gb/s connector for this ST300MM0006 drive?

Yes, the drive uses a 2.5" SAS 6Gb/s interface, so the backplane or controller must provide that exact connector and protocol.

Will this 10000RPM SAS drive work on an older 3Gb/s SAS controller I already own?

The drive supports 6Gb/s SAS and will negotiate down to 3Gb/s on an older controller, though throughput will be limited to the slower link speed.

After installation, how can I verify the ST300MM0006 is running at its full 10000RPM and 6Gb/s link?

Check the drive's reported rotational speed and negotiated link rate in your RAID controller BIOS or OS disk utility; they should show 10000RPM and 6Gb/s.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.