We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

SK hynix

SK hynix 32GB DDR4 3200 ECC Registered RDIMM 2Rx8 CL22 1.2V server RAM

SKU CH-0QAH-19BJS

32 GB DDR4 3200 ECC registered RDIMM with CL22 timing and 1.2 V operation for Xeon Scalable or EPYC servers

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • 32 GB capacity lets you run larger workloads in fewer slots
  • DDR4-3200 speed rated at PC4-25600 bandwidth for high-throughput server tasks
  • ECC registered design corrects single-bit errors and buffers signals for stable full-population operation
  • CL22 latency at 1.20 V matches controller timing for reliable recognition at rated speed
  • 288-pin 2Rx8 RDIMM form factor built for Xeon Scalable and EPYC server platforms

Server Memory Upgrade

This 32 GB DDR4 module is built for Xeon Scalable or EPYC servers that require registered ECC memory. It plugs into a 288-pin slot and runs at the rated speed without manual tuning.

Registered ECC Architecture

The 2Rx8 registered design offloads the memory controller so every slot can be fully populated at full capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots.

Thermals Power and Noise

Operating at 1.2 V the module draws minimal power and produces no audible noise because it has no moving parts. Standard server airflow keeps temperatures within specification during continuous operation.

Highlights

  • 32 GB capacity lets you run larger workloads in fewer slots
  • DDR4-3200 speed rated at PC4-25600 bandwidth for high-throughput server tasks
  • ECC registered design corrects single-bit errors and buffers signals for stable full-population operation
  • CL22 latency at 1.20 V matches controller timing for reliable recognition at rated speed
  • 288-pin 2Rx8 RDIMM form factor built for Xeon Scalable and EPYC server platforms

Specifications

BrandHynix
ModelMEM-DR432L-HL03-ER32
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
FeaturesCompatible with:
UP SERVER - SSG-520P-ACTR12H, SSG-520P-ACTR12L, SSG-540P-E1CTR36H, SSG-540P-E1CTR36H, SSG-540P-E1CTR36L
DP Server - SSG-620P-ACR12H, SSG-620P-ACR12L, SSG-640P-E1CR24H, SSG-640P-E1CR24L, SSG-640P-E1CR36H, SSG-640P-E1CR36L

Questions about this item

Will the 3200 MT/s rating actually run at that speed in my Xeon Scalable server?

Yes — when installed in a supported Xeon Scalable or EPYC platform the module operates at DDR4 3200 (PC4-25600) with CL22 timings at 1.2 V, delivering the full rated data rate.

What does the registered ECC design do for a fully populated 288-pin channel?

The registered buffer reduces electrical load on the memory controller so every slot can be filled at full capacity, while ECC detects and corrects single-bit errors on the fly to prevent silent data corruption.

Does the 288-pin RDIMM fit standard server DIMM slots without extra hardware?

Yes — it uses the standard 288-pin DDR4 RDIMM form factor and mounts directly into any compatible server DIMM socket; no adapters or special brackets are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.