We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5-inch SATA SSD with green label, 480GB

Solidigm

Solidigm D3-S4520 480GB 2.5" SATA enterprise SSD SSDSC2KB480GZ01

SKU CH-GMMG-2S9JB MPN SSDSC2KB480GZ01

480 GB 2.5-inch SATA enterprise SSD with 144-layer TLC NAND, 500 MB/s read, 460 MB/s write, and 2,000,000-hour MTBF for server storage

  • Form Factor2.5"
  • Capacity480GB
  • Memory Components144L TLC 3D NAND
  • InterfaceSATA III
  • Max Sequential ReadUp to 500 MBps
  • Max Sequential WriteUp to 460 MBps
  • 480 GB capacity stores more data per drive
  • 500 MB/s sequential read speeds up data access
  • 460 MB/s sequential write accelerates workload completion
  • 2 million hour MTBF supports continuous server operation
  • 144-layer TLC 3D NAND delivers standard-endurance enterprise reliability

Solidigm D3-S4520 480GB SATA Enterprise SSD

The Solidigm D3-S4520 is a 480GB 2.5-inch SATA III solid-state drive built for data-centre and server workloads. It uses 144-layer TLC 3D NAND to deliver sequential reads up to 500 MBps and writes up to 460 MBps. A 2,000,000-hour MTBF and shock resistance of 1,000 G at 0.5 msec support continuous operation in rack environments.

Suited to read-heavy cloud storage tiers

This drive fits operators who need cost-effective capacity for workloads dominated by reads, such as content delivery, web hosting or archival tiers. It is less appropriate for write-intensive databases, high-frequency logging or any application that demands higher endurance than a standard-endurance SATA drive provides. Builders needing a 2.5-inch form factor with a different interface should verify compatibility before purchase.

Standard-endurance rating defines the target

The D3-S4520 carries a standard-endurance specification, meaning its write durability is calibrated for typical read-centric server tasks rather than sustained heavy writes. That single attribute determines whether the drive matches the intended application profile.

Highlights

  • 480 GB capacity stores more data per drive
  • 500 MB/s sequential read speeds up data access
  • 460 MB/s sequential write accelerates workload completion
  • 2 million hour MTBF supports continuous server operation
  • 144-layer TLC 3D NAND delivers standard-endurance enterprise reliability

Specifications

BrandSolidigm
ModelD3-S4520
Part NumberSSDSC2KB480GZ01
Form Factor2.5"
Capacity480GB
Memory Components144L TLC 3D NAND
InterfaceSATA III
Max Sequential ReadUp to 500 MBps
Max Sequential WriteUp to 460 MBps
MTBF2,000,000 hours
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Shipping weight2.27 kg
Package size279 × 279 × 127 mm

Questions about this item

What SATA port and power connectors does my server need for the 2.5" D3-S4520 480GB drive?

The drive uses a standard SATA III data connector and a SATA power connector, both required on the host backplane or cable assembly.

Will the 6 Gb/s SATA III interface on this D3-S4520 run at full speed on an older 3 Gb/s SATA II backplane?

Yes, the drive is backward compatible and will operate at the 3 Gb/s link speed of a SATA II port.

How can I confirm the SSDSC2KB480GZ01 is performing at its rated 500 MBps sequential read after installation?

Run a sequential-read benchmark such as CrystalDiskMark or fio and verify results approach 500 MBps on a 6 Gb/s SATA link.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.