SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Supermicro
MicroATX server board with LGA 1151 socket, dual Intel gigabit LAN, eight SATA 6.0Gb/s ports with RAID 0/1/5/10, and four DDR4 ECC slots supporting 64GB
The Supermicro MBD-X11SSH-F-O is a micro-ATX motherboard built around the Intel C236 chipset and an LGA 1151 socket. It accepts Xeon E3-1200 v5/v6, 6th/7th Gen Core i3, Pentium and Celeron CPUs up to 80 W TDP. Four 288-pin slots take unbuffered ECC DDR4 UDIMMs at speeds up to 2400 MHz for a maximum of 64 GB.
No onboard CPU or chipset fans are listed, so the board relies entirely on chassis airflow for thermal management. Dual Intel I210-AT controllers provide two Gigabit Ethernet ports without adding active cooling components. Power draw at idle is determined by the installed processor and memory population rather than by extra onboard circuitry.
Under continuous load the single PCI-E 3.0 x8 slot (in an x16 connector), a second x8 slot and an x4 slot (in an x8 connector) share upstream bandwidth from the chipset. Eight SATA 6.0 Gbps ports and an M.2 2280 M-key interface also route through the C236, so heavy simultaneous storage and add-in card traffic can saturate the chipset link.
| Brand | SUPERMICRO |
|---|---|
| Model | MBD-X11SSH-F-O |
| CPU Socket Type | LGA 1151 |
| CPU Type | Intel 7th / 6th Generation Core i3 series, Intel Celeron, Intel Pentium, Intel Xeon processor E3-1200 v6 / v5 Socket H4 (LGA 1151) supported, CPU TDP support 80W |
| North Bridge | Intel C236 |
| Number of DDR4 Slots | 4 x 288-pin |
| DDR4 Standard | DDR4 2400 / 2133 / 1866 / 1600 MHz ECC SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
| Maximum Memory Supported | 64GB |
| ECC Supported | Yes |
| PCI Express x8 | 1 x PCI-E 3.0 x8 (in x16 slot) 1 x PCI-E 3.0 x8 |
| PCI Express x4 | 1 x PCI-E 3.0 x4 (in x8 slot) |
| Other Slots | M.2 Interface: PCI-E 3.0 x2 Form Factor: 2280 Key: M-Key Double Height Connector |
| SATA | 8 x SATA 6.0Gb/s |
| SATA RAID | 0/1/5/10 |
| Onboard Video Chipset | Aspeed AST2400 BMC |
| LAN Chipset | Intel I210-AT |
| LAN Speed | 10/100/1000Mbps |
| Second LAN Chipset | Intel I210-AT |
| Second LAN Speed | 10/100/1000Mbps |
| Max LAN Speed | 2 x 1Gbps |
| COM | 1 |
| Video Ports | 1 x VGA |
| USB 1.1/2.0 | 2 x USB 2.0 |
| USB 3.0 | 2 x USB 3.0 |
| Features | Single socket H4 (LGA 1151) supports Intel Xeon processor E3-1200 v6 / v5, Intel 7th / 6th Gen. Core i3 series, Intel Celeron and Intel Pentium Intel C236 chipset Up to 64GB Unbuffered ECC UDIMM DDR4 2400 MHz; 4 x DIMM slots Expansion slots:1 x PCI-E 3.0 x8 (in x16), 1 x PCI-E 3.0 x8, 1 x PCI-E 3.0 x4 (in x8) Dual GbE LAN with Intel i210-AT 8 x SATA3 (6 Gbps) via C236; RAID 0, 1, 5, 10 I/O: 1 x VGA, 2 x COM, TPM 1.2 header Support Intel VHD with selected CPU 5 x USB 3.0 (2 x rear, 2 x via header, 1 x Type A), 6 x USB 2.0 (2 x rear, 4 x via header) M.2 NGFF connector M.2 Interface: PC |
| Form Factor | Micro ATX |
| Dimensions (W x L) | 9.6" x 9.6" |
| Shipping weight | 0.90 kg |
| Package size | 282 × 274 × 56 mm |
Mount the 9.6" × 9.6" board using standard microATX standoff locations; the I/O shield aligns with the rear cutout and the eight SATA ports face the drive bays.
The four 288-pin DDR4 slots accept up to 64 GB of ECC UDIMM; if a module fails, replace it with a matching 1.2 V DDR4 2400/2133/1866/1600 MHz stick.
The CPU socket is rated for 80 W TDP; the C236 chipset and VRM cooling will reach their thermal ceiling before the dual Intel I210-AT LAN controllers or the Aspeed AST2400 BMC.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?