Supermicro
Supermicro SYS-6018U-TR4T+ 1U rack server 2× Xeon E5-2650 v4 512GB DDR4 4×3.5" 9361-8i X540 2×750W
A 1U rack server with dual 12-core Xeon processors at 2.2 GHz, 512 GB DDR4 ECC memory, a MegaRAID 9361-8i controller for four 3.5-inch SATA/SAS bays.
- Rack Height1U
- Redundant Hot-swap PowerYes
- CPU TypeIntel Xeon
- CPU Speed2.20 GHz
- CPU SocketLGA 2011-3
- Number of CPU Cores12-Core Processor
- Dual 12-core Xeon E5-2650 v4 at 2.2 GHz with 2.9 GHz Turbo
- 512 GB DDR4 2400 MHz ECC registered memory across 16 DIMMs
- MegaRAID 9361-8i SAS 12 Gb/s RAID controller with 1 GB cache and battery
- Quad-port Intel X540 10GBase-T networking plus dedicated IPMI 2.0 LAN
- Redundant hot-swap 750 W platinum power supplies in 1U chassis
Dual Xeon 1U server with 512GB DDR4
The Supermicro SYS-6018U-TR4T+ is a 1U rackmount server system fitted with two Intel Xeon E5-2650 v4 processors, each running at 2.2 GHz with 12 cores. It ships with 512 GB of DDR4 2400 MHz registered ECC memory installed across 16 modules. The chassis provides four hot-plug 3.5-inch drive bays for SATA or SAS drives.
MegaRAID 9361-8i controller and quad 10GBase-T
An LSI MegaRAID 9361-8i controller with 1 GB cache and battery backup manages RAID 0, 1, 5, 6, 10, 50 and 60 across eight SAS 12 Gb/s ports. Network connectivity comes from a Supermicro AOC-UR-i4XT add-in card delivering four RJ45 10GBase-T ports via Intel X540. IPMI 2.0 with dedicated LAN port provides KVM-over-LAN and virtual media. Dual 750 W Platinum redundant power supplies are included.
Suits virtualisation hosts needing dense memory
This configuration suits buyers who need high core count and large memory capacity in a single rack unit for virtualisation or compute clusters. It does not suit buyers who want more than four 3.5-inch drive bays, who require front bezel or rack rails included, or who need GPU compute capability beyond the basic Matrox G200 video output.
Highlights
- Dual 12-core Xeon E5-2650 v4 at 2.2 GHz with 2.9 GHz Turbo
- 512 GB DDR4 2400 MHz ECC registered memory across 16 DIMMs
- MegaRAID 9361-8i SAS 12 Gb/s RAID controller with 1 GB cache and battery
- Quad-port Intel X540 10GBase-T networking plus dedicated IPMI 2.0 LAN
- Redundant hot-swap 750 W platinum power supplies in 1U chassis
Specifications
| Brand | SUPERMICRO |
|---|---|
| Series | CSE-819U + X10DRU-i+ |
| Model | SYS-6018U-TR4T+ |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 2.20 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 12-Core Processor |
| # of Processors Installed | E5-2650 V4 |
| Installed Memory Size | 512GB |
| Storage Controller | LSI MegaRAID 9361-8i Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Supermicro AOC-UR-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports |
| Management Port | RJ 45 |
| Features | 4 x 3.5" SATA/SAS Hot-Plug Drive Bays |
Questions about this item
How long will the 9361-8i controller's battery-backed cache last before replacement?
The MegaRAID 9361-8i includes a battery to protect its 1GB cache during power loss; the battery typically requires replacement every few years to maintain write-back safety.
Which component reaches its thermal limit first when both Xeon E5-2650 v4 CPUs run at 2.9GHz turbo continuously?
The dual 12-core processors at 2.2GHz base with 2.9GHz turbo generate the highest heat load; the 1U chassis uses high-speed fans to keep CPU temperatures within specification.
What is the typical power draw from the two 750W platinum supplies when the system runs 24/7 with 512GB DDR4 and four 3.5" drives?
Redundant 750W platinum units share the load; actual draw depends on CPU utilisation, memory population and drive activity, but the platinum rating ensures high efficiency at typical operating levels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



