Seagate
Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive
- SLC
$23.99
0.00030665BTC
In stock
Synology Inc.
Synology RS826RP+ AMD Ryzen V1500B 4-Bay Rackmount NAS 4GB RAM 1.6TB Cache 80TB Drives
Rackmount NAS with four 20 TB drives, 1.6 TB cache and AMD Ryzen V1500B processor
- Port RJ-454 x 10/100/1000M
- Port USB2 x USB 3.2 Gen 1 Ports
- Form Factor4-Bay
- ProcessorAMD Ryzen
- Installed Memory4GB
- Included HDD Capacity80TB (4 x 20TB)
- Quad-core AMD Ryzen V1500B at 2.2 GHz powers demanding workloads
- Four 1 GbE ports with Link Aggregation boost bandwidth and failover
- 6 TB Synology Enterprise Cache accelerates HDD arrays
- 80 TB raw capacity from four 20 TB Plus NAS drives
- Expandable to 192 TB with one RX426 expansion unit
Compact 1U rackmount NAS for edge
The Synology RS826RP+ is a four-bay 1U rackmount NAS powered by a quad-core eight-thread AMD Ryzen V1500B processor at 2.2 GHz. It ships fully assembled with 4GB DDR4 RAM, 1.6TB of enterprise SSD cache, and four 20TB Synology Plus drives for 80TB raw capacity. Four integrated 1GbE RJ-45 ports support link aggregation and automatic failover for reliable network connectivity.
80TB raw capacity with 192TB expansion headroom
The four installed 20TB drives provide 80TB of raw storage out of the box. A compatible RX426 expansion unit adds four more bays, raising the maximum raw capacity to 192TB when populated with supported 24TB drives. Two 800GB cache SSDs accelerate read and write IOPS for HDD arrays, while two USB 3.2 Gen 1 ports allow direct-attached backup or peripheral connection.
Four 1GbE ports and one PCIe Gen3 slot define
The four onboard 1GbE ports top out at 1000 Mb/s each; aggregated throughput cannot exceed the 1GbE physical layer. A single PCIe Gen3 slot accepts a 10GbE or 25GbE adapter, an M.2 SSD adapter, or a combined M.2 and 10GbE card to go beyond 1GbE speeds. Without an add-in card the system remains bound to 1GbE networking.
Highlights
- Quad-core AMD Ryzen V1500B at 2.2 GHz powers demanding workloads
- Four 1 GbE ports with Link Aggregation boost bandwidth and failover
- 6 TB Synology Enterprise Cache accelerates HDD arrays
- 80 TB raw capacity from four 20 TB Plus NAS drives
- Expandable to 192 TB with one RX426 expansion unit
Specifications
| Brand | Synology |
|---|---|
| Model | RS826RP+ |
| Port RJ-45 | 4 x 10/100/1000M |
| Port USB | 2 x USB 3.2 Gen 1 Ports |
| Form Factor | 4-Bay |
| Processor | AMD Ryzen |
| Installed Memory | 4GB |
| Included HDD Capacity | 80TB (4 x 20TB) |
| Management | Web-Based, DHCP Client |
| LEDs | Power, HDD (Hard Disk Drive), LAN (10/100) |
| Power | 100-240 VAC 50/60Hz |
| Temperature | 0°C - 35 °C |
| Humidity | 5-95% R.H |
| Dimensions | 44 mm × 480 mm × 492.6 mm |
| Weight | 8.0 kg |
| Package Contents | Main Unit × 1 Accessory Pack × 1 AC Power Cord × 1 All Configuration Items |
Questions about this item
Will the four 1GbE ports on the RS826RP+ work with my existing 100 Mbps switch?
Yes, each RJ-45 port auto-negotiates 10/100/1000 Mbps so the NAS will link at 100 Mbps on your current switch and can later use Link Aggregation when you upgrade.
How can I verify the 1.6 TB cache and 80 TB of drives are active after first boot?
Open DSM Storage Manager — it will show two 800 GB cache volumes and four 20 TB drives in the volume overview with health status Normal.
What ships inside the box and what must I source separately?
The package contains the main unit, accessory pack, AC power cord and all configuration items; the four 20 TB drives and two 800 GB cache modules come pre-installed, so no extra drives are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
