We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black standalone USB duplicator with LCD screen and fifteen slots

Systor

Systor SYS-USBD-15 USB Duplicator 15 Target 33MB/s

SKU CH-FV7B-N0S3M

Standalone USB flash drive duplicator copies up to 15 targets simultaneously at 33 MB/s with asynchronous operation and bit-for-bit verification

  • TypeUSB Flash Drive Duplicator
  • Target1 to 15
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, & USB 3.0
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Japanese, Spanish, Portuguese

Target Size 1 to 15

Show 7 more configurations

Struck-through versions exist but are not stocked here.

DATA TRANSFER RATE USB 2.0/2.1 - 2GB/min [33MB/sec]

  • Standalone operation copies drives without a computer
  • Asynchronous mode lets each channel load and copy independently
  • 33 MB/s transfer rate duplicates up to 2 GB per minute
  • 256 MB buffer memory sustains high-speed data flow
  • Bit-for-bit hardware compare confirms every copy is accurate

Standalone 15-target USB duplicator

This unit copies up to 15 flash drives at once without a host computer. It supports USB 1.1, 2.0 and 3.0 media in synchronous or asynchronous modes. A 256 MB buffer and multi-core processor manage each channel independently. The LCD screen and four-button control handle all operations.

USB 3.0 interface caps throughput at 33 MB/s

The duplicator’s maximum sustained transfer rate is 33 MB/s, matching the practical ceiling of the USB 3.0 targets it serves. Older USB 2.0 or 1.1 drives will run at their own lower limits. No internal bus or protocol can exceed this figure, so total session time scales with the slowest attached device.

15 simultaneous targets with bit-level verification

The 15 ports allow high-volume duplication of FAT16, FAT32, NTFS and Linux EXT2/3/4 volumes. Whole-media mode copies every sector regardless of format. Quick-erase and DoD-compliant full-erase modes sanitise drives before reuse. Throughput per port drops when all 15 channels run together, so very large images take proportionally longer.

Highlights

  • Standalone operation copies drives without a computer
  • Asynchronous mode lets each channel load and copy independently
  • 33 MB/s transfer rate duplicates up to 2 GB per minute
  • 256 MB buffer memory sustains high-speed data flow
  • Bit-for-bit hardware compare confirms every copy is accurate

Specifications

TypeUSB Flash Drive Duplicator
Target1 to 15
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, & USB 3.0
Data Transfer Rate33MB/s
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 250 W

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 15-target model or a smaller one?

The 15-target model lets you copy to fifteen USB drives at once, saving time for larger batches.

What does the 33MB/s rate mean when I am actually copying drives?

It equals roughly 2 GB per minute, so a full 16 GB drive finishes in about eight minutes under ideal conditions.

Which USB standards does the duplicator support and what speed ceiling do they impose?

It handles USB 1.1, 2.0 and 3.0 devices; the 33 MB/s ceiling is set by the internal engine, not the USB version.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.